Berenson Swagger Series 3-3/4" (96 mm) Center to Center Matte Black Pull, - 2395-1055-P

Berenson Swagger Matte Black Pull For Cabinets

Berenson Swagger Series matte black pull is a contemporary cabinet handle designed around a 96 mm center to center mounting. This fixed hole spacing lets installers lay out drill patterns quickly on cabinet doors and drawers. The pull is part of the Swagger Series with an uptown appeal style, so it matches projects calling for a contemporary look across multiple fronts. The matte black finish gives a non-reflective appearance that helps modern cabinetry read clean and uniform under jobsite lighting. Constructed from zinc, the pull provides a solid metal feel when operating doors or drawers. The overall 4-3/16 inch length defines how much linear space it occupies on a rail or stile, which matters when aligning multiple pulls in a run. With these defined dimensions and series identity, it fits straightforward layout on residential or commercial cabinetry that uses 96 mm drilling.

Key Swagger Series Pull Details That Matter On Site

• The 96 mm center to center dimension sets exact hole spacing, so jigs and templates can be set once and repeated across multiple cabinet fronts for consistent alignment.
• The 4-3/16 inch length defines the visible footprint, which helps position the pull proportionally on narrower or wider drawer fronts for balanced appearance.
• The 1-1/4 inch projection keeps the pull standing off the surface, giving fingers room to grab while controlling how far the hardware extends into walk paths.
• The 5/8 inch width provides a defined gripping surface, which supports a stable hand feel when opening heavier cabinet drawers or tall pantry doors.
• The matte black finish delivers a dark, even tone, which helps the pull visually coordinate with other matte black decorative hardware on the same project.
• The Swagger Series uptown appeal contemporary style ties this pull to the broader collection, which helps maintain a consistent design theme across a full room layout.

Installation Dimensions And Gripping Clearance Details

The 96 mm center to center measurement on this Berenson Swagger pull fixes the screw hole locations, which supports accurate drilling when using metric-based cabinet layouts. With a 1-1/4 inch projection, the pull extends far enough from the cabinet face to allow a comfortable hand position without feeling bulky. The 15/16 inch hand clearance figure describes the open space behind the pull, which is the working room for fingers when grabbing from above or below. A base diameter of 1/2 inch defines the footprint where the pull meets the cabinet surface, helping installers understand how it will seat on narrow rails and stiles. Together, these dimensions guide hole placement and confirm functional clearance before committing to drilling on finished fronts.

Using This Berenson Swagger Pull In Cabinet Projects

Where This Matte Black Pull Fits Best

This Berenson Swagger Series matte black pull is suited to cabinet applications that are laid out around a 96 mm center to center pattern. Because it is categorized under handles and pulls within decorative hardware and moldings, it aligns with standard cabinet, vanity, or built-in furniture doors and drawers that accept through-bolted hardware. The contemporary uptown appeal style allows it to coordinate with modern fronts, flat-panel doors, or simple framed designs where straight lines are preferred. The 4-3/16 inch length gives it a proportion that works on many medium-width drawers and door rails, offering visual presence without dominating smaller fronts. With a matte black finish in the Swagger Series, it supports design schemes that call for dark pulls against light surfaces or tone-on-tone black installations.

Dimensions That Support Repeatable, Clean Installations

The 96 mm center to center value on this pull is a key installation dimension, because it defines exact drilling locations for both mounting points in metric. Installers can set up boring equipment or handheld templates to that spacing and repeat it across an entire run of cabinets for consistent results. The 1-1/4 inch projection and 15/16 inch hand clearance work together to give functional space for fingers behind the pull, limiting interference with door edges or adjacent fronts. At 5/8 inch width, the gripping surface stays compact while still giving enough edge to pull open heavier drawers. The 1/2 inch base diameter indicates how much area the feet of the pull cover on the door or drawer face, which helps align it over previous drill marks during change-outs. Zinc construction provides a metal body that pairs with these dimensions to deliver a solid-feeling handle once installed.

Common Questions About This Swagger Series Cabinet Pull

Select This Matte Black Pull For 96 Mm Layouts

The Berenson Swagger Series matte black pull combines a 96 mm center to center layout with defined length, projection, and hand clearance figures, giving installers predictable drilling and gripping performance. Its contemporary uptown appeal style and matte black zinc construction connect visually with modern cabinet projects using dark decorative hardware. When a job calls for a 4-3/16 inch long pull in the Swagger Series, these dimensions and finish details support consistent results across a full room of doors and drawers.