Berenson Swagger Series 12-5/8" (320 mm) Center to Center Matte Black Pull, - 2411-1055-P

Berenson Swagger Matte Black Pull For Cabinets

Berenson Swagger Series matte black pull is a contemporary zinc handle designed for cabinet and furniture projects where a long, clean pull is needed. The pull offers a 12-5/8 inch overall length, giving doors and drawers a substantial grasp point across wider fronts. Its 320 mm center to center drilling dimension sets consistent spacing for multi-pull layouts on banks of drawers. The 5/8 inch width provides a slim profile that stays visually light while still giving enough surface to grab. A 1-1/4 inch projection sets the working distance off the face of the cabinet, creating a comfortable reach without sticking too far into walk paths. A 15/16 inch hand clearance dimension gives room behind the pull for fingers, which supports smoother operation on heavier fronts. The matte black finish delivers a non-reflective, modern look suited to contemporary installations.

Key Pull Details That Support Cabinet Work

• The 320 mm center to center measurement sets a precise drilling pattern, which helps align multiple pulls in straight visual lines across doors and drawers.
• The 13-1/16 inch length spans wider cabinet faces, so the handle can match larger doors or long drawer fronts in contemporary layouts.
• The 1-1/4 inch projection positions the grip away from the cabinet face, providing room for fingers while maintaining a compact footprint on the door.
• The 5/8 inch width keeps the pull slim, which helps it sit cleanly on narrow rails or minimal face frame details in modern designs.
• The 15/16 inch hand clearance behind the pull creates usable space for fingers, which supports comfortable opening and closing on daily-use cabinets.
• The 1/2 inch base diameter presents a defined mounting footprint, helping the pull seat consistently against the cabinet surface.
• The matte black finish supplies a dark, uniform surface that supports contemporary styling on both light and dark cabinet colors.
• The zinc material provides a solid-feeling pull body, giving a sturdy handle point for regular cabinet door and drawer operation.

Mounting Dimensions For Accurate Pull Placement

This Berenson Swagger Series pull uses a 320 mm center to center dimension, so drilling can follow a straight metric line across aligned fronts. The pull length of 13-1/16 inches leaves edge distance beyond the mounting holes, which helps keep fasteners set inboard from door edges. A 1-1/4 inch projection controls how far the pull sits off the surface, aiding layout where doors open near walls or adjacent cabinets. With 5/8 inch width and 1/2 inch base diameter, the footprint stays compact, allowing placement on narrower stiles. The 15/16 inch hand clearance dimension describes open space between the pull and the door, guiding layout where a full finger grip is needed on thicker or heavier doors.

Using This Swagger Pull In Cabinet Projects

Where The Berenson Swagger Pull Works Best

The Swagger Series 12-5/8 inch pull suits contemporary cabinet runs that benefit from long, continuous hardware lines. Its 320 mm center to center drilling dimension matches layouts built around metric spacing, useful on modern European-style cabinetry. The 13-1/16 inch overall length means a single pull can visually anchor wide drawer fronts, reducing the need for multiple smaller handles across one face. With 5/8 inch width, the pull rests comfortably on face frames or slab fronts without overwhelming narrow rails. The 1-1/4 inch projection positions the hand away from the cabinet surface, which is helpful when doors sit near adjacent panels where extra finger room is important. A 15/16 inch hand clearance supports a full finger wrap behind the pull, which is useful on daily-use kitchen or workspace cabinets that see frequent operation.

Details That Support Consistent Layout And Feel

The 320 mm center to center spacing on this Swagger Series pull allows repeated drilling using the same metric template, which streamlines layout across multiple cabinets. Having a 13-1/16 inch overall length relative to that drilling pattern leaves balanced overhang on each end, giving a predictable visual margin at both sides of the mounting holes. The 1-1/4 inch projection controls the standoff distance, contributing to a consistent feel when gripping different doors equipped with the same pull. At 5/8 inch wide, the bar thickness remains constant, so each handhold feels similar whether mounted vertically or horizontally. The 1/2 inch base diameter creates a clear transition from bar to door, helping each pull seat in a repeatable way across a long installation. The matte black finish ties all pieces together visually, ensuring that each installed pull reads as part of a unified contemporary hardware set.

Common Questions About This Berenson Cabinet Pull

Selecting This Pull For Contemporary Cabinet Runs

The Berenson Swagger Series matte black pull combines a 320 mm center to center layout, 13-1/16 inch length, and 1-1/4 inch projection to support modern cabinet installations. Its 5/8 inch width, 15/16 inch hand clearance, and 1/2 inch base diameter deliver a consistent grip and compact footprint. The zinc construction with matte black finish aligns with contemporary styling needs on kitchen, bath, or furniture projects. For cabinet runs built around long, straight hardware lines, this pull offers dimensions that support precise drilling, repeatable alignment, and a unified visual result across doors and drawers.