Berenson ZZ Series 3" (76 mm) Center to Center Satin Aluminum Pull, - 6135-4SAL-P

Berenson ZZ Series 3 Inch Pull For Cabinets

Berenson ZZ Series 3 inch pull defines this cabinet hardware as part of the Advantage Wire Pulls collection in the Value series, so it follows a consistent contemporary look across related pulls on the same job. The satin aluminum finish establishes a muted metallic appearance that blends with many modern cabinet and fixture finishes in kitchens, baths, and shop-built casework. Steel material construction gives the pull a solid metal feel in hand during daily use on doors and drawers. A center to center measurement of 3 inches matches a common boring pattern, which streamlines layout for new work and swap-out replacements. Overall length of 3-5/16 inches keeps the pull compact on narrower drawer fronts while still spanning a standard 3 inch drill pattern. A projection of 1-1/4 inches sets the working depth off the face, shaping both hand clearance and visual stand-off from the cabinet surface.

Key Details Of This Satin Aluminum Pull

• The Berenson Corporation brand ties this pull to a recognized decorative hardware source, which helps keep hardware choices consistent across a project when matching other Berenson handles or pulls.
• Belonging to the Advantage Wire Pulls collection gives this pull a defined product family, which aids in planning coordinated looks where multiple wire-style pulls are used on the same bank of cabinets.
• Its Value series designation identifies this pull within Berenson offerings, helping specifiers group it with other Value series pieces when balancing style and cost expectations for a project.
• The contemporary style classification directs this pull toward modern and transitional cabinet designs, helping designers align hardware with flat-panel, slab, or clean-profile door and drawer fronts.
• The satin aluminum finish delivers a soft sheen rather than a mirror shine, which can reduce the appearance of fingerprints and visual glare on frequently used cabinet faces.
• Steel construction provides a metal core behind the satin aluminum finish, supporting a sturdy hand hold on doors and drawers in everyday cabinet use.

Dimension And Fit Details For 3 Inch CC Pull

The 3 inch center to center dimension defines the hole spacing, allowing this pull to align with standard 3 inch boring patterns on cabinet doors and drawers. An overall length of 3-5/16 inches keeps the ends slightly beyond the mounting holes, which provides a balanced visual margin at each side of the screw locations. The 1-1/4 inch projection sets how far the pull stands off the cabinet surface, creating working space for fingers between the door or drawer front and the grip. A hand clearance of 15/16 inch describes the interior gap where fingers wrap the wire form, guiding installers when judging ergonomics for different user needs. Width of 5/16 inch at the grip defines the thickness of the wire profile, which influences both the tactile feel in hand and the visual lightness on the face. A 5/16 inch base diameter establishes the footprint at each contact point, affecting how the pull seats over the drilled holes on the cabinet surface.

Using This Berenson Cabinet Pull In Projects

Where This 3 Inch Center Pull Fits Best

This pull sits in the Decorative Hardware & Moldings category under handles and pulls, positioning it for cabinet, furniture, and casework applications where a wire-style handle is appropriate. The steel material with satin aluminum finish suits interior cabinetry where a metal pull is preferred on doors and drawers. Its contemporary style makes it a natural match for modern cabinet lines, pairing well with flat-panel or simple-profile fronts often used in residential and commercial millwork. With a 3 inch center to center hole spacing, this pull aligns with a widely used spacing on face frames and frameless cabinets, simplifying layout on new fronts drilled to that standard. The compact 3-5/16 inch length also helps it land well on smaller doors or drawers where longer bar pulls might overwhelm the proportions.

Details That Support Consistent Installation Results

The 3 inch center to center specification, paired with the stated 3-5/16 inch overall length, creates a clear relationship between hole placement and visible edge overhang, which helps installers repeat a uniform reveal across a run of doors. A projection of 1-1/4 inches and hand clearance of 15/16 inch work together to define the working envelope for fingers behind the pull, allowing planners to gauge how this hardware will feel in daily operation on thicker or thinner fronts. The 5/16 inch width at the grip offers a defined bearing surface for the hand, which can make multiple openings more comfortable compared to thinner wire forms. A base diameter of 5/16 inch is large enough to cover typical drilled holes for 8-32 machine screws, which supports a neat finished look at each mounting point on painted, stained, or laminated fronts. The manufacturer part number 6135-4SAL-P links these dimensions and finish to a specific catalog item, reducing ordering errors when repeating the same pull across phases of a project.

Common Questions About This Berenson Wire Pull

Select This 3 Inch Pull For Matching Projects

This Berenson ZZ Series 3 inch center to center pull combines a steel body, satin aluminum finish, and contemporary styling, aligning with modern cabinet and furniture work. Its defined dimensions - including 3-5/16 inch length, 1-1/4 inch projection, and 15/16 inch hand clearance - give installers clear data for layout and ergonomics. Tying into the Advantage Wire Pulls collection and Value series, it supports coordinated hardware selection across doors and drawers. Use the manufacturer part number 6135-4SAL-P when specifying this pull for cabinet runs where consistent appearance and fit matter from one opening to the next.