Berenson ZZ Series 4" (102 mm) Center to Center Satin Aluminum Pull, - 6136-4SAL-P

Berenson ZZ Series 4 Inch Pull For Cabinets

Berenson ZZ Series 4 inch pull describes a steel cabinet pull built for a 4 inch center to center layout, so it lines up with standard drilled holes on many doors and drawers. The ZZ Series identity ties this pull to a consistent Berenson family, which helps keep jobs visually uniform across multiple openings. The satin aluminum finish on this pull provides a muted metallic look that fits contemporary projects without high glare. The steel material under that finish gives the pull a solid feel in the hand during repeated daily use. A projection of 1-1/2 inches sets the pull off the front of the cabinet far enough to grip comfortably. The 1 inch width presents a slim profile on the face of the cabinet, which suits modern, clean-lined layouts. Hand clearance of 15/16 inch creates space for fingers between the wire and the door surface.

Key Details Of This Satin Aluminum Pull

• The 4 inch center to center dimension positions the mounting points on a common drilling pattern, which supports straightforward layout work on cabinet doors and drawers.
• The satin aluminum finish on this steel pull delivers a contemporary appearance, which suits modern residential or commercial cabinet designs that call for understated metal tones.
• The 1-1/2 inch projection from the cabinet surface defines how far the pull stands off the face, giving users room to grab without their fingers rubbing the door front.
• The 1 inch overall width keeps the pull visually light on the cabinet face, which supports simple, streamlined design lines on narrow rails or smaller drawer fronts.
• The 15/16 inch hand clearance dimension describes the open space behind the wire section, which matters when users with larger fingers operate doors and drawers daily.
• The 5/16 inch base diameter at each contact point concentrates the footprint, which helps the pull sit precisely on the cabinet surface while keeping the mounting area discreet.

Mounting And Fit For 4 Inch Center Layouts

This 4 inch center to center satin aluminum pull is sized for openings that already have two holes spaced 4 inches apart, which keeps layout simple on common cabinets. The pull is designed around the Advantage Wire Pulls concept, meaning the wire-style form ties into drilled points at both ends rather than using a plate, which can matter when retrofitting existing fronts. The 13-1/2 inch length or diameter value describes the overall reach of the pull, giving extended grip area along the cabinet face. The stated 8-32 x 1 inch screw size sets the thread and length expectation at the mounting points, which helps align this pull with typical cabinet door and drawer front thicknesses used in many shops.

Using This Berenson Pull In Real Projects

Where This Contemporary Wire Pull Works Best

This Value series Advantage Wire Pulls piece fits projects calling for a contemporary style, because the satin aluminum finish keeps reflections soft while still showing a metal tone. On frameless or face frame cabinetry with a modern profile, the 1 inch width keeps the hardware visually narrow so stiles and rails remain the focus. The 4 inch center to center spacing ties directly into common drilling jigs, which is useful when repeating the same layout across a kitchen or commercial run. The 13-1/2 inch overall length or diameter allows the pull to extend across a meaningful portion of a drawer front, giving users several contact points as they reach for it during normal operation. Because the material is steel with a satin aluminum finish, this pull carries the look of aluminum while relying on a steel base, which matters on doors and drawers that see frequent use.

Details That Support Consistent Cabinet Results

The 15/16 inch hand clearance value on this Berenson ZZ Series 4 inch pull defines how much finger room exists behind the wire, which helps users get a confident grip without contacting the cabinet surface. The 1-1/2 inch projection balances reach and clearance, so the pull does not stand excessively far off the face while still providing usable depth. The 5/16 inch base diameter at each mounting point gives a compact contact circle, which helps the pull register consistently against the surface during installation. By using the 8-32 x 1 inch screw size specified for this pull, the mounting interface matches a thread standard commonly found in cabinet work, which supports straightforward fastening into standard door and drawer thicknesses. The consistent dimensions across the Value series allow installers and shops to repeat hole placement and visual alignment from opening to opening, which reduces layout variations on multi-cabinet projects.

Common Questions About This 4 Inch Wire Pull

Choose This Pull For 4 Inch Cabinet Layouts

This Berenson ZZ Series 4 inch pull from the Advantage Wire Pulls Value lineup pairs a 4 inch center to center layout with a satin aluminum finish, so it fits contemporary projects using standard drilling patterns. The steel construction, 1-1/2 inch projection, and 15/16 inch hand clearance combine to create a practical handle geometry for frequent door and drawer use. For cabinet work where a consistent, modern wire pull is needed across multiple openings, this 6136-4SAL-P model offers defined dimensions that support repeatable installation and a unified appearance. Select this satin aluminum pull when 4 inch centers and a slim, contemporary profile match the cabinet hardware plan.