
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune Olympia sheet metal spacer is designed as a dedicated support part for Olympia hinges on sheet metal doors, so the hinge mounts against a consistent surface that respects the hinge geometry. The spacer is 0.7 mm thick, which sets a precise stand-off between the Olympia hinge and the steel door skin for repeatable alignment. This 0.7 mm thickness also helps the hinge sit correctly relative to the door edge, which supports predictable reveal and movement. The spacer is specified as a sheet metal spacer, so it targets metal door applications instead of generic cabinet doors. The part is identified as Olympia spacer for steel door in the description, which ties its use directly to steel door work where Olympia hinges are used. Under Manufacturer Part # 360-BCS, it can be referenced in drawings or job lists without confusion.
The Olympia spacer for steel door is focused on Olympia hinge mounting, so it becomes part of a predictable installation sequence on steel or sheet metal doors. With a 0.7 mm thick profile, it positions the hinge assembly at a known distance from the sheet metal surface, which supports consistent reveals from door to frame. The 35 mm cup diameter follows the Olympia hinge cup size, so the spacer centers the hinge cup over the door preparation instead of relying only on visual alignment. The part serves as a sheet metal spacer behind the Olympia hinge, so the hinge bears on a defined interface that follows the hinge design rather than the raw metal surface alone.
The Olympia spacer for steel door is described as a sheet metal spacer, so its use centers on metal door projects where Olympia hinges are specified. In these applications, installers place the spacer at the hinge location so the Olympia hinge can reference the 0.7 mm thick surface across the hinge footprint. Because the spacer has a 35 mm cup diameter, it aligns with the Olympia hinge cup area on the door, which helps the hinge cup relate properly to the sheet metal opening. That detail matters in steel door construction where hinge cups must sit accurately for the hinge arms to operate as intended. By matching the hinge cup diameter, the spacer supports a more repeatable fit across multiple doors built to the same pattern.
The Sugatsune Olympia sheet metal spacer thickness of 0.7 mm sets a defined stand-off between the hinge and the metal door, and that fixed distance influences both hinge seating and door alignment. In repeated work using Olympia hinges, this uniform 0.7 mm layer helps installers achieve similar reveal and closing behavior from door to door because the hinge starts from the same reference plane. When the web description notes that the spacer allows for easier mount on sheet metal of the Olympia hinges, it points to the way this controlled thickness simplifies fitting the hinge onto thin sheet metal surfaces. The hinge bears on the spacer rather than varying metal irregularities, which supports smoother mounting and more predictable hardware performance across a run of steel doors.
The Sugatsune Olympia sheet metal spacer is used with Olympia hinges on sheet metal doors, so the hinge mounts against a defined surface that supports consistent alignment.
The Olympia spacer for steel door is 0.7 mm thick, which sets a precise gap between the hinge and the metal door surface for predictable hinge positioning.
The Sugatsune Olympia spacer has a 35 mm cup diameter, aligning with the Olympia hinge cup so the hinge registers accurately over the prepared opening.
The 360-BCS Olympia spacer is noted for use with Olympia hinges, tying its geometry and cup diameter to that specific hinge group.
The spacer is described as Olympia spacer for steel door and as a sheet metal spacer, pointing to steel or similar sheet metal door installations.
The Sugatsune Olympia sheet metal spacer allows for easier mount on sheet metal of the Olympia hinges by providing a 0.7 mm thick interface under the hinge.
The Sugatsune Olympia sheet metal spacer, identified as Olympia spacer for steel door and Manufacturer Part # 360-BCS, is tailored to Olympia hinges on sheet metal doors. Its 0.7 mm thickness and 35 mm cup diameter are specified to support that hinge family, so the hinge cup region and the door surface relate in a predictable way. For projects built around Olympia hinges on steel or other sheet metal doors, this spacer provides the defined backing that the web description describes as allowing easier mount on sheet metal of the Olympia hinges.