
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Olympia hinge spacer is a dedicated spacer for Olympia hinges that changes door position by a set 2 mm, giving installers a controlled way to tweak overlay or clearance on cabinet doors. The spacer decreases overlay of outset doors by 2 mm, shifting the door edge slightly inward relative to the cabinet face so reveals can be tightened consistently across a run. The same 2 mm spacer increases clearance of inset doors by 2 mm, moving the door away from the cabinet frame to gain space where the door edge is too tight. Because this spacer is made for the Olympia hinge system, it supports repeatable setups when you are standardizing on that hinge line. Using such a defined 2 mm change helps reduce trial-and-error adjustments on tricky door alignments.
The Olympia hinge spacer handles fine-tuning of door position by using a fixed 2 mm thickness that installers can plan around. When the spacer decreases overlay of outset doors by 2 mm, you can account for that change during layout and drilling and use it to bring slightly overhung doors back into line. When the spacer increases clearance of inset doors by 2 mm, it provides an immediate way to open up a door that was laid out with a gap that is too tight, without changing the hinge cup or door size. Because the spacer can be doubled for 4 mm thickness, it gives you three usable positions - no spacer, 2 mm, or 4 mm - using the same hinge pattern. The specified available mounting plate SL360-P6WT ties this spacer into a known hinge stack, supporting consistent results from cabinet to cabinet.
The Olympia hinge spacer is part of the Olympia hinge setup from Sugatsune America, so it fits into hinge planning where that system is used across a cabinet run. By decreasing overlay of outset doors by 2 mm, the spacer lets you dial in doors that were designed to sit proud of the case but need a small correction to stay visually straight. On inset doors, the same 2 mm increase in clearance helps deal with doors that swell into the opening or were machined with a marginal gap. Since the spacer can be doubled for 4 mm thickness, it supports more aggressive corrections when 2 mm is not enough. Calling out the available mounting plate SL360-P6WT in the same system gives installers a clear combination of hinge, plate, and spacer to reach the geometry required on face frame or frameless cabinets.
The Olympia hinge spacer uses a fixed 2 mm thickness, so every decrease in overlay on outset doors is predictable and can be built into your door and frame layouts. That fixed dimension also controls the 2 mm increase in clearance on inset doors, giving a simple way to correct for edge binding without altering hinges. Because the spacer can be doubled for 4 mm thickness, you gain a stepped approach to correction - zero, 2 mm, or 4 mm - rather than improvising with shims. In planning around the Olympia hinge system, the referenced mounting plate SL360-P6WT defines how plate height and spacer thickness stack together, helping you repeat the same results across multiple cabinets. These defined dimensions support cleaner shop drawings, clearer cut lists, and more efficient on-site adjustments.
The Olympia hinge spacer decreases overlay of outset doors by 2 mm, shifting the door inwards relative to the cabinet face to help correct oversize overlay conditions.
The Olympia hinge spacer increases clearance of inset doors by 2 mm, opening the gap between door and frame to reduce rubbing where the fit is too tight.
The Olympia hinge spacer can be doubled for 4 mm thickness, letting you choose either a 2 mm or 4 mm change in overlay or clearance using the same part.
The SL360-P6WT is an available mounting plate specified for this Olympia application, so it works with the spacer to create a defined hinge and plate combination.
The Olympia hinge spacer is designed as part of the Olympia hinge system from Sugatsune America, aligning with that product family for consistent door geometry.
The Olympia hinge spacer on its own provides a 2 mm change, and when doubled it creates a 4 mm thickness, giving two discrete adjustment steps beyond the base hinge setup.
The Olympia hinge spacer, manufacturer part 360-DP2-P6, is built to introduce a precise 2 mm change in door position with Olympia hinges. On outset doors the spacer decreases overlay of outset doors by 2 mm, while on inset configurations it increases clearance of inset doors by 2 mm, covering both common fit conditions with one part. Because the spacer can be doubled for 4 mm thickness, it suits jobs where you need to correct either small or moderate misalignments without changing hinge layout. The reference to the available mounting plate SL360-P6WT anchors this spacer in a clearly defined Olympia hinge arrangement. For cabinet runs using Sugatsune America Olympia hardware, this spacer can support consistent, planned door alignment.