Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Sugatsune Olympia is a concealed long arm European hinge built for inset doors on face-frame and frameless cabinets, finished in nickel with an integrated self-open mechanism and a 93 degree opening angle.
Inset doors demand a precise relationship between the door edge and the cabinet opening. The Olympia's full crank arm holds the door flush within the frame, maintaining a consistent reveal on all sides. The 93 degree opening is the designed angle for this geometry: enough swing for comfortable daily access, with the arc controlled so the door clears the cabinet front cleanly rather than binding at the edge.
The self-open function is what makes this hinge distinct in the inset category. A press on the door face releases and begins the opening arc, which works naturally with touch-latch hardware or frameless handle-less fronts where no pull is attached. The 35mm cup bores into the back of the door at a standard 11mm depth. The hinge attaches to a separate base plate on the cabinet, which is sold separately and matched to your cabinet construction. Use a Sugatsune plate designed for the Olympia series.
The hinge body is steel with a nickel finish. In inset cabinetry, the narrow reveal around a flush door draws attention to every detail, and the nickel finish carries a warm, bright quality that holds up alongside satin pulls, knobs, and bin hardware in the same metal family. Doors up to 13/16 inch thick fall within the rated thickness window, and the weight rating supports the door sizes typical of kitchen and bath casework when hinges are specified per the manufacturer load guidance.
This is the hinge for designers and cabinet shops specifying inset doors on furniture-grade casework, built-ins, or high-end kitchen cabinetry where the flush look is the point and the hardware has to be consistent. It works on both face-frame and frameless boxes, so it covers a range of construction approaches without switching hardware families. Contractors running touch-latch or push-to-open fronts will find the self-open geometry integrates cleanly with those systems. For a heavier door or a project where damped closing is also needed, check the broader Olympia series for matching configurations.
No. The hinge body and arm are sold here; the base plate mounts to the cabinet and is ordered separately. Use a Sugatsune plate designed for the Olympia series. Plates from other brands are not compatible.
Self-open means a push on the closed door face releases and begins the opening motion. It is distinct from self-close, which pulls a door shut. This hinge opens on a press and does not include a built-in closing spring or damper.
The 93 degree angle is the correct geometry for an inset door: it gives practical access while keeping the door arc clear of the cabinet front. For this application, 93 degrees is the designed opening, not a limitation.
Yes. The Olympia works on both frameless and face-frame constructions. Plate selection will depend on your cabinet type, so confirm the plate matches the box you are working with.
The Olympia in nickel delivers the self-open function and the inset geometry that high-quality casework demands, in a finish that sits naturally alongside the rest of the visible hardware on the job.