
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
3mm Sensys cam adjustable face frame mounting plate defines the hinge connection between an inset door and a face frame cabinet, so the door position can be set with precision rather than fighting misalignment later. This Hettich America Corporation hinge mounting plate is designed for inset doors on face frame cabinets, providing a known geometry that supports repeatable drilling and layout on cabinet runs. The 3mm plate height establishes the door gap relationship, which helps maintain consistent reveals across multiple doors in a bank. Quality classification under EN 15570, Level 3 describes a performance level for the hinge system, giving installers a defined standard to match when pairing components. The zinc die-cast nickel plated construction provides a stable base plate body, while the nickel-plated surface offers a hard, smooth finish that works well in typical cabinet interior environments.
On this Hettich hinge mounting plate, attachment to the face frame with pan head screw 4x20mm establishes a direct mechanical connection into the frame material, giving the hinge arm a solid base when doors are cycled repeatedly. The cam height adjustment plus or minus 1.6mm provides vertical fine-tuning between the door and frame, allowing the installer to correct small deviations in drilling or frame construction without re-drilling the plate position. Because the plate is designed for inset doors on face frame cabinets, its dimensions and adjustment travel are oriented toward bringing the door edge flush with the frame front, which supports clean, even gaps around the door perimeter. The 3mm plate height and cam adjustment interact so final door alignment can be dialed in with the hinge system rather than altering the cabinet.
This 3mm Sensys cam adjustable face frame mounting plate is intended for inset doors on face frame cabinets, so it suits cabinet builds where the door sits within the frame opening instead of overlapping the frame front. The 3mm plate height works as part of the hinge stack-up for Sensys-style applications, helping the hinge arm position the door properly relative to the frame front. Hole line distance LR 9.5mm guides where the fixing holes fall across the frame, which is useful when setting up drilling patterns on recurring cabinet runs in a shop. Because attachment to the face frame uses pan head screw 4x20mm, the installer can rely on a consistent screw length and head style when fastening each plate, keeping the workflow predictable on larger jobs.
The cam height adjustment plus or minus 1.6mm on this mounting plate lets the installer adjust door height relative to the face frame after the hinge is mounted, reducing the need for slotting or re-boring holes when doors sit slightly high or low. That adjustability is especially important with inset doors, where small height errors are highly visible against the frame edges and need tight control. Quality classification under EN 15570, Level 3 ties this component to a specific hinge performance standard, so when used within a matching Hettich system the installer is working inside a defined durability and function range. The zinc die-cast nickel plated construction supports that role by giving the cam mechanism and screw interfaces a rigid, wear-resistant base, which helps the adjustment remain stable over time in normal cabinet use. Combined, these details support repeatable, fine-tuned door alignment across an entire kitchen or built-in installation.
This 3mm Sensys cam adjustable face frame mounting plate is for inset doors on face frame cabinets, so it aligns the hinge setup with traditional framed cabinet construction.
The 3mm plate height sets the hinge arm off the face frame by a fixed amount, helping establish the door-to-frame relationship and supporting consistent reveals along the run.
The cam height adjustment plus or minus 1.6mm allows precise vertical tuning of the door relative to the frame, so small construction or drilling variances can be corrected without relocating the plate.
This hinge mounting plate attaches to the face frame with pan head screw 4x20mm, creating a direct, repeatable fastening method suited to standard cabinet frame materials.
The EN 15570 Level 3 quality classification associates the mounting plate with a tested hinge performance level, supporting use where that standard is part of the project requirements.
The hole line distance LR 9.5mm defines the lateral spacing reference for the plate mounting holes, helping drilling jigs and boring patterns line up consistently across cabinets.
This 3mm Sensys cam adjustable face frame mounting plate from Hettich America Corporation brings defined geometry and cam height adjustment plus or minus 1.6mm to inset doors on face frame cabinets, supporting accurate alignment across a project. When a job calls for a hinge mounting plate with EN 15570 Level 3 quality classification, zinc die-cast nickel plated construction, and attachment using pan head screw 4x20mm, this part number 9179885 provides those specific characteristics in a single component.
Sold In: 1 Each