Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Actro 5D depth adjustment is a dedicated depth adjustment set for Hettich Actro 5D drawer applications, so installers can fine-tune front panel position using parts designed for that specific system. The gray depth adjustment components are built from steel and gray plastic, giving a solid mechanical interface with a finished look that blends into modern drawer hardware. Tool-less installation allows the depth adjusters and activators to be fitted and set without separate tools, which speeds up drawer front alignment on site and reduces setup time. Adjustment up to plus or minus 2 mm gives a controlled range to move inset front panels forward or back, which helps correct minor cabinet and panel tolerances during final fit. Optional use with inset front panels means it is applied only where an inset layout needs depth control, helping match reveals across a run of drawers.
Tool-less installation on the Actro 5D depth adjustment means the depth adjusters and activators are mounted and set without separate tools, which helps during cabinet runs where repeated adjustments are common. The adjustment range of plus or minus 2 mm is built into the mechanism, so the front panel can be moved in controlled steps rather than relying on oversized holes or improvised shims. Optional use with inset front panels focuses this adjustment function where the front must sit flush with the cabinet face, supporting clean lines on inset drawer projects. Construction from steel and gray plastic creates a consistent interface to the Actro 5D components, which is important when the same adjustment behavior is needed across multiple drawers.
The Actro 5D depth adjustment set is designed for drawers using the Actro 5D system where fine front-to-back movement of inset fronts is required, so it fits naturally into higher-precision cabinet work. Its optional use with inset front panels targets situations where the drawer front sits in line with the cabinet face, which is where even small depth errors are visible across a bank of drawers. Because the adjustment can reach plus or minus 2 mm, it addresses common dimensional variations in carcasses and fronts, giving enough travel to tune individual fronts without changing the cabinet. The gray steel and plastic construction coordinates with typical drawer slides and runners, helping maintain a consistent professional appearance inside the cabinet.
The built-in adjustment up to plus or minus 2 mm lets installers shift a drawer front forward or back in a measured way, which is useful when face frames, panels, or boxes vary slightly from plan. By relying on the Actro 5D depth adjustment mechanism instead of altering the cabinet, the front can be tuned at the hardware level, which can simplify rework if design changes appear late. Tool-less installation adds value here, since adjustments across several drawers can be done in sequence without changing tools, supporting a smoother workflow during punch-out. When used with inset front panels, this same plus or minus 2 mm range helps align reveals so each front sits in the same plane, improving the overall visual consistency of the drawer bank.
The Actro 5D depth adjustment set provides adjustable front-to-back positioning for drawer fronts, so installers can fine-tune the depth of inset panels within a defined plus or minus 2 mm range.
The tool-less design of the Actro 5D depth adjustment allows the depth adjusters and activators to be installed and set by hand, which speeds alignment work on multiple drawers.
The Actro 5D depth adjustment offers up to plus or minus 2 mm of movement, giving enough travel to correct small depth differences in inset drawer fronts.
The Actro 5D depth adjustment is for optional use with inset front panels when precise front-to-back positioning is needed to align flush fronts across cabinet drawers.
The Actro 5D depth adjustment is made from steel and gray plastic, providing a stable mechanical interface with a neutral finish suitable for modern drawer hardware.
Hettich part number 9257706 identifies this specific Actro 5D depth adjustment set, helping match the correct depth control components within the Actro 5D system.
The Actro 5D depth adjustment, part number 9257706, offers tool-less setup and plus or minus 2 mm of movement for inset front panels, so depth can be tuned at the hardware rather than at the cabinet. Using steel and gray plastic components keeps the adjustment mechanism consistent with Hettich Actro 5D drawer elements, which supports uniform performance across a project. For jobs where inset front alignment is critical, this dedicated Actro 5D depth adjustment set provides a defined method to position drawer fronts in line with surrounding faces.
Sold In: 1 Set
