
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Hettich M6 x 14mm Euro Screw is a flat head, coarse-thread fastener designed to mount European cup hinges, drawer slides, and shelf hardware into the pre-bored 5mm line-bore holes of 32mm system cabinetry. It drives with a #2 Phillips bit and carries a Nickel finish, arriving in a box of 1000 ready for production use.
Euro screws like this one are the fastener of record for the 32mm system, the layout standard behind most European frameless cabinet construction. The system spaces mounting holes at 32mm intervals along the cabinet side panel, and every hinge plate, drawer slide bracket, and shelf pin clip is engineered to land on those holes. This M6 x 14mm screw threads into those positions to lock the hardware in place. It is not a general-purpose wood screw: the blunt point depends on a pre-bored 5mm hole, and the M6 thread is sized specifically for that system. Cabinet shops building frameless boxes, installers hanging European hinges, and millwork teams mounting undermount or side-mount drawer slides all reach for this type of fastener as a routine part of the process.
The screw body is finished in Nickel, which blends with the metallic tones common in European hinge hardware and keeps the cabinet interior looking consistent. The coarse thread is well matched to the engineered wood panels — particleboard, MDF, and melamine-laminated substrates — that make up the majority of frameless cabinet carcasses. These low-density materials grip a coarse thread more effectively than a fine thread, which is why Euro screws are designed this way. The flat head seats cleanly against the flat bearing surfaces of hinge mounting plates and slide brackets, and the absence of nibs suits the pre-bored installation method where the hole is already sized for a clean fit.
A box of 1000 suits the pace of a working cabinet shop. A single run of kitchen or bath cabinets can consume dozens of Euro screws across hinges, drawer slides, and shelf hardware, and running short mid-installation creates real downtime. Production cabinet manufacturers, custom shops, and professional installers who work with European hardware systems regularly stock this fastener in volume. The #2 Phillips drive means no special bits are required, and the consistent Hettich specification ensures the screw fits hardware from the same manufacturer without head-seating or thread-engagement surprises.
No. The blunt point on this Euro screw requires a pre-bored 5mm pilot hole. It is designed to thread into the line-bore holes already present in 32mm system panels, not to self-start in undrilled material.
The M6 thread and flat head are the standard specification for 32mm system Euro screws, so this fastener is generally compatible with European hinge mounting plates, drawer slide brackets, and shelf hardware that call for an M6 Euro screw. Confirm the mounting plate hole size matches before substituting across brands.
Particleboard and MDF, the most common substrates in frameless cabinet construction, grip coarse threads better than fine threads. The wider thread profile displaces more fiber volume per turn, which improves pull-out resistance in these low-density panels.
A 14mm length is sized to engage the panel material without over-penetrating a standard 3/4-inch (19mm) cabinet side. It provides adequate thread engagement while leaving a safety margin between the screw tip and the exterior panel face.
The Nickel finish suits dry, indoor cabinet environments. For applications with sustained moisture exposure, confirm that the finish meets the corrosion requirements before specifying.
When European hinge and slide installation is a daily task, keeping a box of properly specified Euro screws on hand means the work does not stop for a hardware run — and this 1000-piece Hettich box is sized to stay ahead of that demand.
Sold In: 1 Each