Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the Hettich Quadro front fixing clip set for 3/4 inch (19mm) drawer sides, supplied in black plastic with one left-hand and one right-hand clip per set — everything needed to lock a drawer front to the Quadro undermount system in a single order.
Front fixing clips complete the Quadro installation: once the drawer box is seated on the undermount runners, these clips fasten under the front of the box and lock the decorative drawer front in place. The 2mm height adjustment built into the clip lets you true up the front after the drawer is hung, correcting minor reveals without taking the box apart. That adjustment matters most in multi-drawer runs — a stack of four or five drawers in a tall cabinet benefits from being able to tune each front independently once all the boxes are in.
The black finish suits interiors where a dark or neutral clip is preferable to a white or gray one — typical in frameless cabinets with black melamine interiors, wire-basket pull-outs in a modern pantry, or any application where the hardware inside the cabinet is expected to recede visually. The color does not affect function, but it does keep the install looking intentional.
The clips are molded in black plastic, consistent with Hettich's Quadro accessory line. Plastic construction keeps the clip lightweight and non-marring against the drawer box material, while the Quadro system's dimensional tolerances do the structural work. These clips are a retention and adjustment component, not a structural load-bearing one — the runners carry the drawer's weight, and the clips hold the front square.
Cabinet shops running the Hettich Quadro system reach for this SKU when building out drawer stacks in frameless cabinets with 3/4 inch drawer sides — a common choice for shops that cut their own Baltic birch or MDF boxes at the 19mm thickness. The box-of-10 format suits a production run rather than a single repair: ten sets cover ten complete drawers, which is roughly one moderate-sized project. Homeowners retrofitting a single drawer or sourcing a replacement clip for an existing Quadro install will find the set format straightforward — one box replaces up to ten fronts without splitting a kit.
No. These clips are Quadro series components. Hettich runner accessories are series-specific — Quadro clips are not compatible with Actro or other Hettich systems, and using the wrong clip will prevent the drawer front from seating correctly.
The clip geometry is calibrated to the drawer side thickness. The 3/4 inch (19mm) version fits boxes built from 19mm material; the 5/8 inch (16mm) version fits 16mm sides. The two are not interchangeable — using the wrong thickness version will result in a front that does not seat or adjust correctly on the runner.
The built-in adjustment range is plus 2mm. That is enough to correct minor reveals and align fronts in a multi-drawer stack without pulling the box or re-drilling.
Yes — the clips are handed, and one left-hand and one right-hand clip are included in each set. One set completes one drawer. Order one set per drawer, or one box of 10 sets for up to ten drawers.
Matching the clip to your runner series and drawer side thickness is the whole job here. Get those two right and the Quadro front fixing clip set handles the rest — a solid front attachment with just enough adjustment to make every reveal line up.
Sold In: 1 Set