Hettich Quadro V6 12 inch undermount slide is a soft-close, full extension drawer slide that carries drawers on concealed tracks, so the drawer runs on ball bearings while the hardware stays out of sight. The right hand design matches installations that use handed undermount runners for accurate motion. Soft-close and silent closing help drawers finish their travel smoothly, which matters in fitted cabinetry where slammed drawers can disturb alignment. Full extension travel lets the drawer come fully forward, so contents are accessible without pulling against the slide. Ball bearing construction guides the movement, supporting the load along the runner length for consistent performance over the slide stroke.
The Quadro V6 design meets or exceeds ANSI / BHMA 156.9 grade 1 requirements, so the slide performance aligns with a recognized cabinet hardware standard for this product class. A load capacity up to 90 lbs dynamic, and 100 lbs static on a 21 inch length slide, ties the runner design to applications where drawers carry substantial contents while still moving through the soft-close cycle. For drawer construction, the system is specified for 1/2 inch, or 13 mm, and 5/8 inch, or 16 mm, drawer side thickness, which directs box construction toward side dimensions that match the runner interface. Slide on installation with catches works together with these drawer side dimensions, linking construction choices directly to mounting efficiency.
This undermount drawer slide from Hettich America Corporation is part of the Quadro V6 product class, placing it in a category built around concealed runners for cabinetry. The right hand configuration serves cabinet layouts that pair left and right runners, supporting applications where drawer motion must stay square under load. Galvanized steel construction makes the slide suitable for rooms exposed to moisture, so it fits environments such as kitchens, bathrooms, or utility spaces where humidity and occasional damp conditions are normal. The soft-close and silent function manages the final part of the closing stroke, which matters in residential or commercial installations where controlled motion and reduced noise support everyday use. Full extension travel ensures the usable drawer depth matches the nominal slide length, which helps designers plan internal storage around complete access.
Tool-less height adjustment on the drawer connection lets the installer fine-tune front position after the slide has been mounted, translating directly into faster alignment of face fronts across a run of drawers. Side adjustment up to plus or minus 2 mm using 2D front fixing clips provides lateral fine tuning at the front, which helps correct small variations in cabinet box squareness or front drilling patterns. The dynamic load capacity up to 90 lbs, matched with the Quadro V6 ball bearing design, supports stable running clearance while the adjustment features are used, so fronts stay aligned as drawers are loaded. Optionally upgradeable Push to open Silent combines a convenient opening mechanism with silent and soft closing, which allows handleless fronts to work with the same adjustment structure for consistent gaps and closing behavior. Slide on installation with catches links all of these adjustments to a repeatable mounting action, helping maintain consistent reveal and motion characteristics across multiple cabinets built to the same specification.
The Hettich 9315250 is a Quadro V6 full extension undermount drawer slide with soft-close and ball bearing running, so the slide stays concealed while providing controlled, smooth motion.
This Quadro V6 slide has a load capacity up to 90 lbs dynamic and 100 lbs static on a 21 inch length slide, supporting drawers that carry substantial everyday contents.
The Quadro V6 slide is specified for 1/2 inch, or 13 mm, and 5/8 inch, or 16 mm, drawer side thickness, guiding box construction toward side dimensions that match the runner interface.
Side adjustment up to plus or minus 2 mm using 2D front fixing clips lets you shift the drawer front laterally, which helps tune reveals and gaps across adjacent drawers in a cabinet run.
Tool-less height adjustment lets the installer move the drawer front vertically after mounting, so face fronts across a bank of drawers can be aligned without reworking fixed screw positions.
Meeting or exceeding ANSI BHMA 156.9 grade 1 requirements means the Quadro V6 slide follows a recognized performance standard, supporting dependable operation in its intended drawer applications.
This Hettich Quadro V6 12 inch undermount slide combines soft-close, full extension travel, and a right hand configuration with slide on installation, making it suited to concealed drawer applications that demand clean reveals. Tool-less height adjustment and side adjustment up to plus or minus 2 mm support precise front alignment in banks of drawers. Galvanized steel construction, dynamic load capacity up to 90 lbs, and ANSI / BHMA 156.9 grade 1 performance position this slide for use in moisture-exposed rooms where consistent motion and stable alignment are important. For cabinetry built around 1/2 inch or 5/8 inch drawer sides, these details help match drawer construction, slide performance, and installation workflow.
Sold In: 1 Each