Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hettich Quadro V6 18 inch undermount drawer slide gives an 18 inch full extension undermount runner that supports drawers opening their full length, so contents stay accessible from front to back. The soft close function slows the closing stroke and pulls the drawer in gently, which protects fronts and minimizes slam noise in day-to-day cabinet use. The left hand design matches the specified orientation, which matters when pairing with the correct right side runner in a Quadro V6 set. Ball bearing construction supports smooth, consistent travel along the slide path, so drawer motion feels controlled even under load. The slide on installation with catches allows the drawer to be connected to the runner quickly, supporting efficient shop or site assembly. Tool-less drawer adjustment built into this system lets installers correct minor alignment issues without separate tools, helping finish jobs faster.
The Quadro V6 system offers tool-less height adjustment at the runner, so vertical positioning of the drawer front can be tuned after mounting, which is helpful when cabinets or fronts vary slightly. Side adjustment up to plus or minus 2 mm using 2D front fixing clips lets installers move the drawer front sideways at the attachment point, helping dial in consistent gaps between adjacent fronts. The slide on installation with catches means drawers can be set onto the runners and locked in place without extra fasteners at this interface, which streamlines mounting steps on multi-drawer projects. Galvanized steel construction is specified as suitable for rooms exposed to moisture, which supports use in kitchens, baths, and similar interiors where humidity is present. For drawer box design, this slide works with 1/2 inch (13 mm) or 5/8 inch (16 mm) drawer side thickness, guiding material selection and construction details.
This Quadro V6 soft-close undermount drawer slide is part of the Hettich America Corporation range, placing it in a system recognized in the undermount drawer slide category. The product class is specified as undermount drawer slides, so the runner supports the drawer from below, keeping hardware hidden under the box. The slide is described as suitable for rooms exposed to moisture, and the galvanized steel construction supports this by resisting typical indoor humidity. These characteristics make the slide suited to kitchen, bath, and general cabinetry where drawers see frequent use and occasional moisture. The option to upgrade the slide with Push to open Silent combines a push-to-open mechanism with silent and soft closing, so designers can engineer handle-free fronts while keeping controlled closing action. This combination supports modern cabinet layouts where clean face lines and quiet motion are priorities.
The Hettich Quadro V6 9304301 slide connects with slide on installation using catches, which aids repeatable assembly during new builds or replacements. Tool-less drawer adjustment, including height and side adjustment up to plus or minus 2 mm with 2D front fixing clips, lets installers refine drawer front position at the hardware interface, improving the visual result across multiple fronts. The system meets or exceeds ANSI / BHMA 156.9 grade 1 requirements, which indicates performance verified against industry drawer slide criteria, giving confidence when specifying for higher-duty cabinet use. Load capacity up to 90 lbs dynamic and 100 lbs static, as per the same standard on a 21 inch length slide, supports heavier drawer loads common in kitchen or storage applications. Compatibility with 1/2 inch or 5/8 inch drawer side thickness ties the hardware directly to typical drawer construction, which helps maintain predictable clearances and smooth running over time.
The Hettich Quadro V6 9304301 is an 18 inch soft-close full extension undermount drawer slide, so it supports the drawer from below and lets it open to its full length.
The tool-less height adjustment on this undermount slide lets the installer raise or lower the drawer front at the runner, helping align fronts quickly without extra tools.
Side adjustment up to plus or minus 2 mm with 2D front fixing clips lets the drawer front shift sideways, helping create even gaps between neighboring drawer fronts.
This slide has a load capacity up to 90 lbs dynamic and 100 lbs static on a 21 inch length, meeting ANSI / BHMA 156.9 grade 1, which supports higher duty cabinet drawers.
The Quadro V6 9304301 undermount slide is specified for drawer side thicknesses of 1/2 inch (13 mm) or 5/8 inch (16 mm), guiding drawer box material and design.
The Quadro V6 slide is optionally upgradeable with Push to open Silent, combining a push-to-open mechanism with silent and soft closing for handle-free, quiet drawer operation.
The Hettich Quadro V6 18 inch soft-close full extension undermount drawer slide, left hand 9304301, combines concealed undermount support, soft closing, and precise adjustment for professional cabinet work. Slide on installation with catches, tool-less height adjustment, and side adjustment up to plus or minus 2 mm give installers practical control over drawer fit and alignment. Galvanized steel construction suited for rooms exposed to moisture and ANSI / BHMA 156.9 grade 1 performance make this slide a strong choice when specifying hardware for kitchens, baths, or built-in storage using 1/2 inch or 5/8 inch drawer sides.
Sold In: 1 Each
