Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Hettich 2000mm push-to-open synchronization bar keeps both sides of a wide drawer moving together when the front is pressed, delivering consistent, rattle-free ejection across the full width of the drawer.
A push-to-open mechanism ejects the drawer from a single actuation point at the front. On narrow drawers that works cleanly. On wide drawers, a single-point release causes one side to lead the other, producing a skewed, resistant open or a front that tilts instead of traveling straight out. The synchronization bar connects both slide sides mechanically so that one press triggers equal movement across the full drawer width. The result is a smooth, level ejection every time the front is touched.
At 2000mm, this bar ships at a length that accommodates wide installation runs and can be trimmed to the required span on site. It is a required component in push-to-open wide-drawer builds, not an optional upgrade — skip it and the drawer will rack.
This synchronization bar is a Hettich system component and is engineered for use with Hettich push-to-open drawer hardware. Synchronization rods, locking devices, front fixings, and actuation mechanisms are series-specific within the Hettich lineup and do not cross over to other brands or drawer systems. Confirm the bar is specified for your Hettich series before ordering.
Installation runs the bar beneath the drawer, connecting the left and right slide actuation points. The 2000mm stock length means this is typically a cut-to-length component; verify your cabinet's interior width and the required rod span from the Hettich installation documentation before cutting.
Handle-less kitchen drawers and wide cabinet drawers built on a Hettich push-to-open platform are the primary application. Any drawer wide enough that a single actuation point cannot drive both sides evenly needs this bar. It is equally relevant in commercial and residential cabinetry wherever a clean, hardware-free front is specified alongside Hettich drawer hardware. Shops running production on Hettich systems will want this stocked alongside their push-to-open mechanisms to avoid stopping a build for a missing component.
This bar is rated for push-to-open applications within the Hettich system. Whether it pairs with a combined push-to-open and soft-close slide depends on the specific Hettich series. Confirm compatibility with your slide series using Hettich documentation before specifying.
No. Synchronization components are engineered per brand and per series. This bar is a Hettich system part and is not interchangeable with Grass, Blum, or other brand mechanisms.
The 2000mm stock length is a cut-to-length format intended to be trimmed to the required span of your installation. Check the Hettich installation guide for your series to confirm the required rod length for your drawer width before cutting.
The listing is for one 2000mm synchronization bar. Confirm whether your drawer build requires one or more bars based on the Hettich system documentation for your series.
A push-to-open wide drawer without a synchronization bar is an incomplete installation. Stock this component alongside your Hettich push-to-open hardware so the build goes together in one pass.
Sold In: 1 Each