Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is a drawer front connector for the Hettich InnoTech Atira drawer system, designed to attach the drawer front to the drawer's railing using expanding dowels that lock the joint without visible fasteners. It is sold in White, making it the right choice when the drawer interior and visible hardware need to stay consistent with white-finished InnoTech Atira components.
When a shop or installer is fitting drawer fronts to InnoTech Atira boxes, the front connector is the interface between the front panel and the railing. The expanding dowel design means the front is pressed onto the connector and locked in place at the socket rather than screwed through the face — a clean approach that works well on painted or foil-wrapped fronts where surface fasteners would break the finish. This connector is the right specification when the front needs to come on and off for alignment, painting, or replacement without damaging the panel.
The White finish matters here: in a white interior cabinet run, mismatched connector colors can show through slab fronts with thin gaps or at the bottom reveal. Using the white version keeps everything consistent where it counts.
The connector is molded plastic in White. Plastic is standard for this component type across metal drawer systems — it is light, corrosion-resistant, and provides the flex the expanding dowel needs to seat and release cleanly. The White finish is a true color match for white InnoTech Atira profiles; do not substitute a silver or anthracite connector and expect a color-neutral result in a white interior.
Cabinet shops building InnoTech Atira drawer runs in white interiors are the primary buyer, particularly those specifying a consistent all-white drawer interior from railing to front connector. Installers replacing a damaged or missing connector on an existing InnoTech Atira installation will also find this the correct service part. It is not a generic Hettich connector — if your project uses AvanTech YOU profiles or an earlier Hettich platform, confirm compatibility with that system's front fixing hardware before ordering.
The sold-as unit is not specified in the available data. Verify the pack quantity with the product listing before ordering to avoid a short shipment on a drawer run.
No. This connector is part of the InnoTech Atira series and is matched to the InnoTech Atira railing and socket. AvanTech YOU uses its own front connector hardware, which is a separate product line.
Expanding dowel connectors in this category typically press in by hand and release with a flat tool or the system's release lever, but installation detail is not confirmed in the available data. Consult the InnoTech Atira installation guide for the exact procedure.
On narrow-gap slab fronts and painted inset applications, the connector and socket sit close to the bottom reveal or side gap. A white connector in a white interior disappears; a dark connector in the same position can show as a visible dark spot through the gap.
A drawer front that works loose or sits unevenly usually traces back to the connector, not the slide. Specifying the correct InnoTech Atira front connector in the right finish means the front goes on cleanly, adjusts true, and stays there through years of daily use.
Sold In: 1 Each