Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The InnoFit 100 is Hettich's integrated drawer box system, designed to pair drawer sides, runners, and front fixings into one engineered platform for cabinet and furniture installations. It is built for shops and specifiers who need a consistent, repeatable drawer solution across production runs.
The InnoFit 100 suits cabinet shops building frameless or face-frame cabinetry who want to move away from cut-and-groove wood drawer boxes without stepping up to a fully premium system. It fits kitchens, bath vanities, office casework, and bedroom furniture where a clean metal interior and reliable drawer motion matter more than decorative side visibility. The platform's consistent sizing makes it especially practical when multiple drawers of the same depth repeat across a run of cabinets, reducing the variables from one box to the next.
As a metal drawer system, InnoFit 100 replaces wood sides with formed steel profiles that carry both the structural load and the running gear in one slim wall. The buyer supplies the front, drawer bottom, and back to the system's cutting formula. Front fixings, rear brackets, and any motion accessories are Hettich InnoFit-specific components and are not interchangeable with other Hettich series or other brands. Confirm the nominal length and side height for each drawer position before ordering, and build the drawer bottom to the published cutting dimensions for this system.
Cabinet shops running medium-volume production and contractors sourcing for a multi-room project will find InnoFit 100 easy to specify once and repeat. Designers specifying handle-less or clean-face cabinetry benefit from a system that accepts front adjustment after the fronts are hung. Homeowners finishing a renovation get a drawer interior that looks factory-fitted rather than site-built. The InnoFit 100 keeps the build moving whether the job is a single vanity or a full kitchen worth of boxes.
The system supplies the side profiles and running gear. You supply the drawer front, the drawer bottom panel cut to the system's formula, and the back panel. Front fixing brackets and rear mounting brackets are ordered separately as Hettich InnoFit accessories.
No. InnoFit locking devices, front fixings, and rear brackets are specific to the InnoFit platform. Do not mix components with other Hettich series or other brands.
Soft-close capability depends on the specific runner and motion accessories ordered for this system. Check the InnoFit 100 runner listings for motion options; the system name alone does not confirm a damped close.
Measure your cabinet depth and drawer opening height. Nominal length must match the cabinet's interior depth to the system's specification; side height is selected based on the drawer's open height and intended use, with taller profiles for pot and pantry drawers and lower profiles for cutlery and shallow pulls.
Specify InnoFit 100 by nominal length and side height, build the box to the system's cutting formula, and hang the fronts with the matching fixings — the same sequence every time, on every drawer in the run.
Sold In: 1 Each