Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 260mm push-to-open undermount drawer slide is the left-hand cabinet member for a handle-less drawer installation, bringing full-extension travel and a 49 lb load rating to frameless cabinetry. Pair it with its matching right-hand member and the appropriate drawer members to complete one working drawer set.
Push-to-open suits any drawer front where visible hardware would interrupt the design: slab-front kitchen drawers, furniture pieces with continuous grain wraps, and built-ins where hardware would break a flush plane. Full extension earns its place in drawers that actually get used — a kitchen spice drawer, a file cabinet, a bathroom vanity base — where reaching the back without pulling the whole box out is a daily convenience, not a luxury. At 260mm (the closed slide length), this runner is sized for shallower drawers in the 10-inch nominal depth range, a common fit for upper cabinet pull-outs, narrow base drawers, and short-depth furniture applications.
The Quadro V6 runs on steel ball bearings in formed raceways, a construction that keeps travel consistent across the load range and resists the side-load deflection that shortens the life of roller-based slides. The zinc finish protects the steel for indoor service. The slide mounts to the frameless cabinet side panel directly — no face-frame adapter or rear bracket is needed for a standard frameless installation, though face-frame applications require the appropriate rear mounting hardware for the Quadro V6 series. The drawer side thickness range of 1/2 inch to 5/8 inch covers both typical solid wood box sides and thinner engineered-panel construction.
Cabinet shops running handle-less kitchen programs specify the Quadro V6 when the design calls for clean fronts without the complexity of a powered opening system. Furniture makers building storage pieces with no visible hardware reach for this slide when the drawer depth falls in the shallow range and the load stays within the 49 lb rating. Designers specifying frameless built-ins for residential projects use the push-to-open function to keep surface planes unbroken. In every case, the left-hand member is only part of the order: complete the pair with the matching right-hand cabinet member and the corresponding drawer members for each drawer in the run.
No. This is the left-hand cabinet member only. A working drawer requires one left-hand member, one right-hand member, and the matching drawer members. Order the right-hand variant and the appropriate drawer members to complete the set.
The push-to-open and soft-close functions are not combined in this slide. Verify the specific motion capabilities of this Quadro V6 configuration against the Hettich product documentation before specifying if damped closing is a requirement.
The slide accepts drawer sides from 1/2 inch to 5/8 inch thick. Build the drawer box to Hettich's published specification for the Quadro V6, including the correct box width and any required rear notch, to ensure proper seating on the runners.
This slide is listed for frameless cabinet installation. Face-frame applications require rear mounting hardware specific to the Quadro V6 series, sold separately. Confirm the bracket requirements with Hettich documentation before ordering for a face-frame job.
The 260mm nominal length suits drawer boxes built to approximately the 10-inch nominal depth range. The drawer box must be built to the Hettich-specified length for the Quadro V6 undermount to seat correctly — an undermount slide is not forgiving of a box length mismatch the way a side-mount slide is.
Get the left-hand member right, pair it with the matching right-hand member, and the Quadro V6 delivers full-extension, push-to-open operation in a frameless drawer that looks finished from every angle.
Sold In: 1 Each