Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 350mm left-hand undermount drawer slide brings push-to-open function to frameless cabinetry, letting a light press on the drawer front eject the drawer without a handle. This is the left-hand cabinet member — sized for a 350mm drawer and rated 67 lb — designed to pair with its right-hand counterpart for a complete undermount installation.
Push-to-open suits any drawer that needs to open hands-free: a lower cabinet while carrying a pot, a bathroom vanity where hardware would clutter a clean front, or a built-in where flush design is the specification. Because the Quadro V6 delivers full extension, the entire drawer box clears the cabinet face — so the back corner of a base cabinet drawer is just as reachable as the front. The 350mm slide length matches a shallow-to-mid-depth drawer box, a common size in kitchen base cabinets and bathroom vanities.
The Quadro V6 is built from steel with a zinc finish — the standard corrosion-resistant treatment for drawer slides in dry indoor cabinetry. Ball bearings running in full-length steel raceways handle the load smoothly and consistently over years of cycling. The slide accommodates drawer sides from 1/2 inch to 5/8 inch thick, so it works with both thinner economy drawer stock and the slightly heavier 5/8 inch sides common in production shops. Zinc-finished steel is an indoor finish; this slide is suited to kitchen, bath, and furniture applications in dry environments.
Cabinet shops running frameless boxes and handle-less door programs will find the Quadro V6 push-to-open slide straightforward to specify: the full-extension travel suits production kitchen and bath work, and the 67 lb rating covers most residential drawer loads. Designers working with hardware-free fronts can specify this slide knowing the push-to-open function is built into the slide itself, not a retrofit add-on. Contractors installing frameless cabinetry can source left- and right-hand members together and keep the install moving without sourcing separate push-to-open hardware. This slide suits frameless cabinet construction; face-frame installations require rear mounting hardware — confirm rear bracket compatibility with the Quadro V6 series before ordering for framed boxes.
This is the left-hand cabinet member. One left-hand and one right-hand slide make a complete working pair for one drawer. Order both orientations to outfit a drawer.
The Quadro V6 push-to-open slide opens the drawer when the front is pressed. Whether soft-close damping is integrated in this specific model should be confirmed against Hettich's published Quadro V6 specifications before ordering if a damped close is a requirement for your project.
This slide fits drawer sides from 1/2 inch to 5/8 inch thick — it spans both common side thicknesses, so you do not need separate models for different box specs within that range.
The Quadro V6 is specified for frameless cabinet construction. Face-frame installations set the cabinet side back from the frame and typically require rear mounting brackets; confirm Quadro V6 rear bracket availability and compatibility before specifying this slide for framed boxes.
Undermount slides require the drawer box to be built to the manufacturer's specification for box width, side thickness, and rear notching. Build the drawer box to Hettich's published Quadro V6 box requirements — a generic box that has not been sized and notched to spec will not seat correctly on these slides.
When the design calls for a handle-less drawer and the cabinet is frameless, the Quadro V6 350mm push-to-open left-hand slide delivers full-extension travel and reliable push-to-open function in one slide — pair it with the right-hand member and build the box to spec.
Sold In: 1 Each