Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 350mm push-to-open undermount drawer slide is a right-hand ball-bearing slide designed for handle-less frameless cabinetry. Full extension brings the entire drawer to the cabinet face, and the built-in push-to-open mechanism ejects the drawer at a press on the front — no handle, no pull. This is a single right-hand cabinet member; pair it with its left-hand counterpart and the matching drawer members to complete one drawer installation.
Handle-less drawer fronts are a design standard in modern frameless cabinetry, but they put a functional demand on the slide: the drawer has to open without anything to grip. The Quadro V6's push-to-open mechanism meets that demand mechanically, with no power supply or drive unit involved. Press the front, the mechanism ejects the drawer, and you pull from there. That sequence matters most in kitchens where hands are frequently occupied — at the range, at the sink, or during prep — and in cabinet shop installations where a clean, hardware-free face is part of the spec. Full extension means nothing stays buried at the back; the whole drawer comes forward to the opening.
The Quadro V6 is built from steel with a zinc finish that protects the slide through years of indoor cabinet service. Ball bearings run in formed steel raceways, giving the slide its load rating and its feel: movement stays smooth and consistent whether the drawer carries a light load or a heavy one. The zinc finish is a functional choice — it blends with the cabinet interior and holds up to the repetition of daily use without treatment or maintenance. This slide is an indoor undermount component; it is not rated for wet, exterior, or corrosive environments.
Cabinet shops building frameless kitchens with handle-less fronts reach for this slide when the spec calls for push-to-open travel in a 350mm drawer depth. Designers specifying contemporary European-style cabinetry use it where hardware-free faces are part of the aesthetic. The 1/2 to 5/8 inch drawer side range gives fabricators flexibility across standard drawer box stock without switching slide models. At 67 lb per pair, the rating covers utility drawers, pots-and-pans pulls, and most residential kitchen loads without stepping up to a heavy-duty class. This is a frameless-cabinet slide — it mounts directly to the cabinet side panel and does not require rear brackets for installation.
One drawer requires a right-hand cabinet member, a left-hand cabinet member, and the corresponding drawer members for both sides. This SKU is the right-hand cabinet member only. Order the left-hand version separately, along with both drawer members, to equip one drawer. Ordering two of this SKU gives you two right-hand pieces, which will not form a working pair.
Push-to-open and soft-close are separate functions. This slide carries the push-to-open mechanism; whether soft-close is also present depends on the specific Quadro V6 variant. Confirm the motion technology on the SKU you select — a plain push-to-open model is not damped on the close unless soft-close is also specified.
This Quadro V6 variant is specified for frameless cabinet construction, where the slide mounts directly to the cabinet side panel. Face-frame installations typically require rear mounting brackets or a face-frame-specific slide version to support the back of the slide. Use the frameless version in frameless cabinets.
This model is rated for drawer sides from 1/2 inch to 5/8 inch. A 3/4 inch side is outside that range, so this version is not the right fit. Hettich offers Quadro V6 variants sized for 3/4 inch drawer sides — check the drawer side thickness attribute when selecting your SKU.
350mm is the nominal slide length, which corresponds to the drawer box length this slide is designed to carry. Because this is a full-extension model, the travel is approximately equal to the slide length, bringing the full drawer box to the cabinet face when opened. Slide length and drawer travel are distinct specs; on full-extension models they are close but not always identical.
When the design calls for a clean face and a 350mm frameless drawer, the Quadro V6 push-to-open right-hand slide delivers the mechanism and the travel to make it work — press to open, full extension, rated load, and ball-bearing smooth from the first cycle to the last.
Sold In: 1 Each