Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Hettich Quadro V6 is a full-extension, ball-bearing undermount drawer slide in a left-hand cabinet member, sized for 520mm drawer boxes and rated at 67 lb per pair. It carries the push-to-open mechanism that opens the drawer with a press on the front — no pull required — making it the right slide for handle-less designs in frameless cabinet construction.
Handle-less kitchen fronts are the most common application: a clean slab front with no visible hardware depends on push-to-open to function, and an undermount slide keeps the mechanism hidden beneath the box. The same setup works in bath vanities, media consoles, and furniture pieces where the design calls for an uninterrupted front face. Full extension means the back of a spice drawer, utensil drawer, or file drawer comes all the way out — no reaching in. The 520mm length suits a standard-depth kitchen cabinet box built to the Quadro V6 nominal dimension.
The Quadro V6 is a steel, ball-bearing undermount slide with a zinc finish — a functional, install-and-forget finish suited to the enclosed cabinet environment. The slide is designed for frameless (European-style) cabinets, mounting directly to the flat interior side panel without rear brackets. Drawer side thickness must fall between 1/2 inch and 5/8 inch; the slide is engineered for that range and the drawer box must be built to the Hettich Quadro V6 specification, including the correct box width, bottom groove position, rear notch, and any required drilling for the locking device. This is the left-hand member only — one piece, for the left side of the cabinet.
Cabinet shops building handle-less frameless kitchens will find this slide suits production-pace installation: the push-to-open function is built into the slide rather than added as a separate adapter, and the Quadro V6 series supports Hettich's system accessories for consistent box-to-slide fit across a run of cabinets. Designers specifying a hardware-free aesthetic in residential or light commercial work can call out the Quadro V6 by series with confidence that the drawer front stays clean. Contractors sourcing a replacement left-hand member for an existing Quadro V6 installation will find the series designation and orientation here. Note that push-to-open and soft-close are separate functions — the push-to-open mechanism opens the drawer, while soft-close damping requires a Hettich Silent System component matched to this series.
This is the left-hand cabinet member. A working drawer takes one left-hand and one right-hand cabinet member, plus the corresponding drawer members. Order the matching right-hand Quadro V6 520mm push-to-open unit and both drawer-side members to build a complete pair. The locking devices that fasten the drawer box to the slides are also required and are ordered separately.
The push-to-open function opens the drawer; soft-close damping is a separate feature. On a plain push-to-open slide, the two functions conflict on a single mechanism. Hettich's Silent System adds damped closing to the Quadro series, but confirm that the specific Silent System component matches the Quadro V6 series before ordering.
The Quadro V6 is specified for frameless (European-style) cabinet construction, where the slide mounts directly to the flat interior panel. Face-frame installations set the cabinet side back from the frame and typically need rear mounting brackets or a face-frame-specific slide version — the standard Quadro V6 does not include that hardware.
No. The Quadro V6 9117871 is engineered for drawer sides between 1/2 inch and 5/8 inch. A 3/4 inch side falls outside that range; look for the Quadro V6 variant specified for 3/4 inch (19mm) drawer sides.
Push-to-open mechanisms require a set gap between the drawer front and the cabinet face so the press has enough travel to trigger the ejector. The exact gap dimension is specified in Hettich's installation documentation for the Quadro V6 series — follow that spec when setting the front during installation.
When the design calls for clean fronts and full drawer access, the Quadro V6 left-hand push-to-open member delivers the function without visible hardware — pair it correctly, build the box to spec, and the drawer works the first time.
Sold In: 1 Each