Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
SlideLine M single track runner profile provides a dedicated running profile for cabinet sliding doors, so doors travel on a defined path along the cabinet instead of dragging on the case material. This runner profile is designed for pressing into a groove, creating an integrated track inside the cabinet construction rather than relying on surface-mounted rails. The profile length of 2500mm, or 98.43 inches, gives enough continuous run for long cabinet spans, which helps support smooth travel across multiple door positions. This track is specified as 1-track runner profile, so it forms a single running lane that pairs with the compatible SlideLine M sliding components to guide each door along its inset line in the cabinet.
This SlideLine M 1-track runner profile is designed for pressing into a groove, which means the cabinet construction needs a matching groove to seat the aluminum profile along the run. When the profile is pressed into that groove, the track becomes part of the cabinet structure instead of standing proud on the surface, which helps keep the sliding system visually minimal on the fascia side. The runner profile is specified as inset, so it works where the sliding doors sit within the cabinet body rather than overlaying the front edges. With a single continuous 2500mm length, installers can run the track along the full cabinet top or bottom, then trim and position it according to the casework layout.
This SlideLine 1-track,2500mm,inset,prs in,slv runner profile is applied in cabinet sliding door hardware assemblies where a single running lane is needed for each set of doors. The product belongs to the sliding door hardware class, so it serves as the running base in cabinets that use sliding fronts instead of hinged doors. Four runner profiles must be fitted per 2-door or 3-door cabinet, which sets a clear pattern for how many tracks are allocated to each cabinet layout so that every door has consistent guidance. Because the profile is pressed into a groove, it suits casework where the cabinet builder can machine a groove for the track in the top, bottom, or intermediate panels. The inset design aligns with cabinet projects that place the sliding door fronts inside the overall carcass line, presenting flat case sides while the doors move within the opening.
The Hettich SlideLine M single track runner profile uses aluminum with a silver anodized finish, creating a uniform track material that behaves consistently along its entire 2500mm length, which helps keep door running behavior even from end to end. The 98.43 inch dimension is long enough that many cabinet runs can be handled from a single profile, helping panel shops produce repeatable systems based on the same cut-to-length track. As a 1-track runner profile dedicated to sliding door hardware, it defines a specific running channel for the compatible door components, which makes it easier for shops and installers to replicate successful assemblies across multiple cabinets. The requirement that four runner profiles must be fitted per 2-door or 3-door cabinet standardizes the number of profiles per cabinet, so planning and cutting can be organized around that count for consistent production flow. The press-in groove interface ties the aluminum track to precise groove locations, which supports accurate alignment of door travel relative to shelves, partitions, and cabinet faces in repeated builds.
The SlideLine M single track runner profile is for sliding door hardware, so it serves as the running profile in cabinet sliding door systems.
The SlideLine 1-track runner profile is for pressing into a groove, so it seats into a machined groove in the cabinet components for a recessed track location.
This runner profile requires four runner profiles per 2-door or 3-door cabinet, so it is intended for multi-door sliding cabinet layouts using the SlideLine system.
The SlideLine runner profile length is 2500mm, or 98.43 inches, so it can span long cabinet runs before being cut to the required size.
The sliding track is aluminum with a silver anodized finish, so it offers a smooth, hard surface along the track where the sliding components run.
Hettich part number 9227188 identifies the SlideLine 1-track,2500mm,inset,prs in,slv runner profile, so projects can repeat the same specified sliding door track.
The SlideLine M single track runner profile from Hettich America Corporation gives cabinet projects a defined 1-track, inset runner profile for sliding doors, pressed into a groove for an integrated track. With a 2500mm aluminum, silver anodized profile and a requirement of four profiles per 2-door or 3-door cabinet, shops and installers can plan sliding door hardware layouts around a repeatable Hettich sliding door track specification.
Sold In: 1 Each