600mm Left Hand WingLine L Set with Self Closing for 25Kg Maximum Door Wing

WingLine L Set Of Fittings For Folding Doors

WingLine L set of fittings is a Hettich folding sliding door hardware set designed for 1 folding sliding door with 2 wings, so it provides the core components needed to build a 2-wing folding door in a cabinet run. The set is specified for a 25 kg maximum door wing, which helps installers size each wing so the running component operates within its rated load on furniture-scale projects. This set is manufactured by Hettich America Corporation in the sliding door hardware category, so it fits into professional cabinet and closet projects that already use Hettich systems. The manufacturer part number 9237852 clearly identifies this configuration for repeat orders or matching across drawings and hardware schedules. The product is part of the WingLine L system in sliding door hardware, which anchors it as a dedicated solution when planning folding fronts instead of standard hinged doors.

Key WingLine L Details That Support Projects

• The set of fittings contains all the parts required for 1 folding sliding door with 2 wings, which lets planners cover a single opening with a coordinated hardware layout for both door leaves.
• The set of fittings can only be used in combination with Pull to move and Push to move, so the motion concept is predefined and helps designers coordinate user operation with matching actuation hardware.
• Running and guide components without spring assisted self closing feature give a defined, non-spring-assisted movement, which suits applications where the door is positioned by the user instead of being pulled shut by a spring.
• Running and guide components with tool-less fast installation function speed up fitting time on site, because the components are designed for quick mounting without extra tools on those interfaces.
• Cabinet body hinges without self closing feature must be used with this set of fittings, aligning hinge behavior with the non-spring-assisted running and guide components for consistent motion.

Installation And Setup Of WingLine L Components

This WingLine L set uses a running component rated for 25 kg maximum per door wing, so layout and material selection can be planned around that load when sizing each wing panel. The running and guide components feature a tool-less fast installation function, which helps installers mount and adjust these parts efficiently where accessibility is limited along cabinet tops and bottoms. Cabinet body hinges without self closing feature must be paired with this set, so the hinge action matches the running system and avoids conflicting spring forces on the folding wings. The set of fittings can only be used in combination with Pull to move and Push to move, meaning the installation is configured from the start for those specific actuation styles.

Using WingLine L Fittings In Real Projects

Folding Sliding Door Use In Cabinet Runs

The set of fittings is defined for 1 folding sliding door with 2 wings, which fits cabinet or closet fronts where a two-panel folding layout clears openings without wide swinging arcs. The sliding door hardware category anchors this WingLine L set for situations where doors need to stack off to the side, keeping access open along the cabinet width. A running component rated for 25 kg maximum door wing supports typical furniture-scale fronts, so designers can specify panel materials and dimensions within that capacity for stable travel. Guide and running components without spring assisted self closing feature keep motion controlled directly by the user, which suits installations where doors are frequently positioned partially open during work. Two door dampers in the set of fittings support a gentler end-of-travel motion for the doors, contributing to smoother closing at the limits of the sliding path in everyday use.

Hardware Details That Support Consistent Motion

The set of fittings can only be used in combination with Pull to move and Push to move, so the operating method is standardized around those motion concepts, which helps repeat the same user experience across a run of cabinets. Running and guide components with tool-less fast installation function simplify repetitive assembly, which is valuable when multiple cabinets use the same WingLine L configuration on a project. Four folding door hinges and the centre hinges establish the pivot geometry for the 2 wings, which keeps the folding line consistently aligned along the opening over time. Two positioning aids assist in locating the parts during fitting, supporting accurate placement that helps the running and guide components track cleanly along their paths. Cabinet body hinges without self closing feature must be used with this set, which means the hinge and sliding actions work together without extra spring pull that could affect door alignment. The running component cover keeps the running component visually finished, which helps installations where the track zone is visible inside a cabinet or wardrobe when the doors are open.

Technical Questions About WingLine L Folding Set

Selecting This WingLine L Set For Your Project

The WingLine L set of fittings from Hettich America Corporation is defined for 1 folding sliding door with 2 wings and a 25 kg maximum door wing, which suits many cabinet and wardrobe fronts in woodworking projects. The requirement to use cabinet body hinges without self closing feature and to pair the system with Pull to move and Push to move gives a clear framework for planning the door layout. For projects needing a folding sliding solution in the sliding door hardware category, this WingLine L configuration aligns the running component, guide component, hinges, and dampers into a coordinated system ready to be specified by part number 9237852.