WingLine L Set Of Fittings For Folding Doors

WingLine L set of fittings is a Hettich sliding door hardware solution for one folding sliding door with two wings, giving installers a defined kit for building a 600mm left hand WingLine L door wing rated for a 25 kg maximum door wing. This set of fittings is designed for a single folding sliding door with 2 wings, so planning a run of cabinets stays straightforward. The set of fittings can only be used in combination with Pull to move and Push to move, which defines the operating concept and helps you match this hardware to the correct door system. Running and guide components are specified without spring assisted self closing feature, so the door movement follows the chosen hinges and dampers instead of an internal spring. Running and guide components with tool-less fast installation function speed up mounting and removal during fitting or later adjustment.

Key WingLine L Details For Door Projects

• The set of fittings contains all the parts required for 1 folding sliding door with 2 wings, so one defined hardware kit serves a single opening in a project layout.
• The system is specified for a 25 kg max door wing using the 600mm left hand WingLine L configuration, which helps match door construction, material choice, and hardware limits.
• The set of fittings can only be used in combination with Pull to move and Push to move, tying this kit directly to those Hettich operating systems for predictable movement.
• Running and guide components without spring assisted self closing feature give the door a non-sprung action, which is useful where the closing behavior is controlled by hinges and added dampers.
• Running and guide components with tool-less fast installation function support quicker mounting and removal, helping installers speed through repetitive cabinet builds or service work.

Installation And Component Use On WingLine L

This Hettich America Corporation WingLine L set of fittings is specified around a running component rated for 25 kg max, without self closing feature, so door wing weight and behavior can be aligned with project requirements. The set of fittings contains 1 running component and 1 guide component, both without self closing feature, giving the top and bottom guidance a consistent, non-sprung movement. Four folding door hinges are part of the defined hardware set for the two door wings, which supports a stable folding joint layout across the opening. Two positioning aids and centre hinges are specified, helping with consistent hinge placement relative to the folding line for repeatable installs. One running component cover is identified in the description, which helps finish the running area around the running component for a cleaner track presentation. Two door dampers are specified in the set, so the door movement can be moderated within this hardware concept when the door is brought to a stop.

How This Folding Sliding Door Hardware Works

WingLine L Folding Sliding Door Application Points

This WingLine L set of fittings is identified as sliding door hardware in the Builders Hardware | Sliding Door Hardware category, so it is aimed at folding sliding door applications rather than standard hinged cabinet fronts. The description specifies that the set of fittings contains all the parts required for 1 folding sliding door with 2 wings, so it is intended wherever a single two-wing folding element closes off a cabinet or similar opening. The set of fittings can only be used in combination with Pull to move and Push to move, so it slots into projects that are already designed around those Hettich movement systems. The specification for a 25 kg max door wing lets fabricators align door material, thickness, and any applied fronts within that weight envelope across each wing. The product sits under the Hettich America Corporation brand, which positions it with other Hettich sliding door and folding door solutions inside a coordinated hardware program.

Details That Support Consistent Mounting Results

The running and guide components without spring assisted self closing feature give the installer a predictable, non-sprung running action, helping fine-tune clearances and damper performance without an internal spring affecting the motion. Running and guide components with tool-less fast installation function are described, so clipping these parts in and out during fitting, drilling checks, or later service can be done quickly. The component list specifies four folding door hinges and centre hinges, giving the folding joint defined pivot points that support consistent reveal and gap lines along the two wings. Two positioning aids are named, which help align hinges or components in a repeatable way from cabinet to cabinet, reducing layout variance on multi-unit runs. Two door dampers are identified, providing controlled damping at the end of travel when used with the non-sprung running components, which supports a smoother closing action in the cabinet application.

Common WingLine L 25 Kg Door Questions

Selecting This WingLine L Set For Your Job

This 600mm left hand WingLine L set from Hettich America Corporation groups the running component, guide component, folding door hinges, positioning aids, centre hinges, running component cover, and door dampers into one defined sliding door hardware solution. The set of fittings is specified for 1 folding sliding door with 2 wings and a 25 kg maximum door wing, so it aligns well with projects that call for a controlled, non-sprung folding sliding action tied to Pull to move and Push to move systems. For folding sliding door work in the Builders Hardware | Sliding Door Hardware space, this WingLine L configuration gives a focused option for installers building around cabinet body hinges without self closing feature and the recommended Sensys 8675 110 degree hinge.