WingLine L Sliding Door Hardware Set For Folding Doors

WingLine L sliding door hardware set defines this Hettich America Corporation solution for building a left hand, 600mm folding sliding door with two wings. The set of fittings is designed for 1 folding sliding door with 2 wings, so a single assembly handles one complete opening where a compact, side-folding movement is needed. As sliding door hardware from the builders hardware and sliding door hardware category, it gives installers a dedicated system rather than mixing unrelated parts on site. The left hand configuration helps when planning cabinet layouts where doors stack to a specific side. With a 12Kg maximum door panel reference in the product name and a running component rated at 25 kg max, this configuration signals suitability for typical cabinet door weights while maintaining reserve capacity in the running gear.

Key WingLine L Features That Support Door Projects

• The set of fittings contains all the parts required for 1 folding sliding door with 2 wings, which centralizes component selection and supports repeatable assembly on similar cabinet runs.
• The set of fittings can only be used in combination with Pull to move and Push to move, so it aligns directly with Hettich WingLine L motion concepts already used in many cabinet programs.
• Running and guide components without spring assisted self closing feature provide straightforward, predictable movement that will not pull the door closed on its own, important where manual control of the closing action is preferred.
• Running and guide components with tool-less fast installation function shorten setup time on site, which matters when fitting multiple openings or working within tight project schedules.
• Two door dampers are part of the fittings set description, giving the folding sliding door a cushioned end position that helps reduce impact forces on the cabinet.

Installation Roles Of Running And Guide Components

The running component, rated at 25 kg max and specified in the Web Description as part of this WingLine L sliding door hardware set, carries the moving load of the folding door, so its capacity informs panel material and width choices on a job. The matching guide component without self closing feature keeps the door tracking correctly along its path, supporting clean alignment between the two wings when opening and closing. Running and guide components with tool-less fast installation function allow these key parts to be mounted and adjusted without separate tools at each step, which is valuable when installing multiple cabinets or working from a ladder. The running component cover in the set description gives the installed track area a finished appearance, helping hardware blend with surrounding casework.

Using This Hettich WingLine L Set In Cabinets

Where The WingLine L Sliding Door Hardware Set Fits

This Hettich America Corporation sliding door hardware from the builders hardware and sliding door hardware product class is intended for folding sliding doors where two wings share a single opening. The 600mm left hand configuration described in the product name supports layouts where doors fold and park to the left side of the cabinet run, useful in tall storage or upper cabinets needing clear access. The requirement that the set of fittings can only be used in combination with Pull to move and Push to move means it is aimed at installations already designed around those WingLine L operating modes, tying this set directly into existing system planning. Cabinet body hinges without self closing feature must be used with this set of fittings, so the door movement and closing behavior stay consistent with the non-self-closing running and guide components.

Details That Help Achieve Repeatable Door Results

The set name "600mm Left Hand WingLine L Set with Self Closing for 12Kg Maximum Door Panel" gives installers a quick shorthand for door size direction and approximate load, which simplifies specifying the same configuration across multiple cabinets. At the same time, the Web Description notes a running component, 25 kg max, without self closing feature and a guide component without self closing feature, clarifying that the moving hardware itself does not pull the door shut, which helps avoid unexpected door behavior in finished spaces. Two door dampers referenced in the fittings set description work with the non-self-closing components to provide a controlled end motion, so doors settle more gently against cabinet structures. Four folding door hinges, centre hinges, and two positioning aids in the description define the hinge and alignment strategy for the two wings, supporting consistent gaps and smooth folding action. The recommendation "Sensys 8675 opening angle 110 degrees" guides hinge choice toward an opening geometry that matches this folding sliding concept, helping maintain clear access through the 600mm opening.

Common Questions About This WingLine L Door Set

Selecting This WingLine L Set For Your Project

The Hettich WingLine L sliding door hardware set with left hand, 600mm configuration and 12Kg maximum door panel reference offers a defined approach to building a folding sliding door with 2 wings for one opening. With running and guide components without spring assisted self closing feature, plus tool-less fast installation function, it combines manual door control with efficient mounting. For cabinet projects built around Pull to move and Push to move WingLine L concepts, choosing this set aligns the folding door layout, hinge selection, and load parameters into one coordinated hardware solution ready for shop or site installation.