Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8' Cabinet Installation System is a wall hanging rail system from Kreg Tool designed for wall cabinet installation. The system uses a section of mounting bracket that temporarily holds wall cabinets in place, which supports one-person hanging and frees your hands for fastening. It allows you to position your wall cabinets until they are permanently mounted to wall studs, so you can work at a controlled pace during layout and fastening. The rail allows wall cabinets to mount flush to the wall, helping you achieve tight, professional alignment without fighting gaps at the back. Convenient customizable 2' sections create up to 8' of continuous cabinet run, so you can set multiple cabinets along a straight reference without moving individual supports repeatedly. The system works with varying sizes of cabinets and can support wall cabinets mounted within 1' of the ceiling, which helps when running cabinets high on the wall in kitchens, laundry rooms, or garages.
This wall hanging rail system functions as a temporary mounting bracket so cabinets can be held in position while you secure them to wall studs. It supports cabinet materials 5/8" to 1" thick, which covers common MDF, particle core, and plywood construction used in many wall cabinets. The rail temporarily holds a wall cabinet load up to 60 lbs per 2' section, so each 2' span provides a defined holding capacity during installation. With up to 8' of cabinet run, you can stage several cabinets along one reference line, then focus on stud fastening and face alignment. Because the system is part of a wall hanging rail product class, it integrates naturally into cabinet, closet, and garage organization layouts that use wall-mounted storage.
The KCS-100 cabinet installation rail is part of a wall hanging rail system suited to wall cabinet runs up to 8', which covers many kitchen, closet, and garage upper layouts. It works with cabinet box materials from 5/8" to 1" thick, so it can support typical MDF, particle core, and plywood cabinet constructions during installation. Because it can temporarily hold up to 60 lbs per 2' section, it is suited to standard wall cabinet loads within that range, providing defined temporary support during positioning. The ability to mount wall cabinets within 1' of the ceiling means it fits upper-wall applications where cabinets are set high, such as above appliances, in utility rooms, or in garage storage runs. As a wall hanging rail system in the Shelf, Closet & Garage Organization category, it aligns with organizers and cabinet systems that rely on wall-mounted support to keep floor areas open.
The simple, adjustable system is designed for one-person cabinet installation, which directly affects efficiency when an installer is working alone. The section of mounting bracket temporarily holds wall cabinets while you adjust and align positioning, so you can fine-tune reveals and level without juggling the cabinet weight. Because the rail allows cabinets to mount flush to the wall, it supports clean alignment between cabinet backs and the wall surface, which helps keep face frames or slab fronts in the same plane. Customizable 2' sections let you build up to an 8' run, so you can lay out cabinet spacing along a straight, repeatable reference, reducing rework caused by misaligned starting points. The system works with varying cabinet sizes, allowing small and large cabinets to share the same rail during install, which simplifies workflow across a wall. The defined temporary capacity of 60 lbs per 2' section gives a clear operating window for how much cabinet load each span handles while you fasten to studs.
The 8' Cabinet Installation System is designed to temporarily hold wall cabinets in place so you can position, adjust, and then permanently mount them to wall studs during installation.
The system uses a mounting bracket that temporarily holds wall cabinets, so one person can handle alignment and fastening without lifting the cabinet throughout the process.
The rail works with cabinet materials 5/8" to 1" thick, including MDF, particle core, and plywood, so it suits many common wall cabinet box constructions.
The KCS-100 system uses customizable 2' sections that can support up to 8' of wall cabinets, allowing you to stage a full run on one aligned rail.
Each 2' section temporarily holds a wall cabinet load up to 60 lbs, giving a defined limit for how much weight can be supported during installation.
The cabinet installation system allows wall cabinets to be mounted within 1' of the ceiling, which supports high wall installations in kitchens, closets, and garages.
The 8' Cabinet Installation System from Kreg Tool offers a simple, adjustable wall hanging rail setup that temporarily supports wall cabinets while you align and fasten. With customizable 2' sections, defined 60 lb per 2' temporary capacity, and compatibility with 5/8" to 1" thick MDF, particle core, and plywood cabinets, it fits many standard wall cabinet runs. For installers planning up to 8' of wall cabinets, often within 1' of the ceiling, this system helps create a stable reference so cabinets can be mounted flush to the wall and fastened to studs with controlled positioning.
Sold In: 1 Set
