Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Guide Channel 1222 provides a continuous path for a sliding door guide, so the door tracks straight along the floor instead of wandering, which helps doors operate smoothly in everyday use. This Hettich America Corporation channel is classified as sliding door hardware, so it is designed specifically for guiding sliding doors rather than general trim, which helps keep projects consistent with a known hardware system. The continuous guide channel 1222 works with no. 1211 guide roller, so the roller runs inside a matched profile, which supports repeatable movement over the full length. The channel is 16 feet long, so it can span long door openings in one run, which avoids joints that can interrupt travel. Dimensions of 5/8 inch by 3/4 inch, or 16 by 19 mm, define the working cross-section, which helps align the channel layout with the guide roller engagement and surrounding flooring.
The continuous guide channel 1222 can be mortised into the floor, which lets the 16 by 19 mm aluminum section sit down into a groove so the top edge can be coordinated with finished flooring for a low profile guide path. The same channel can also be surface mounted, which uses the full 0.093 inch thick extruded aluminum body above the floor to form the guide path without cutting a recess. Using the channel with the no. 1211 guide roller means the roller is sized to work inside this 5/8 inch by 3/4 inch profile, which helps the sliding door stay captured in the track whether the installer chooses mortised or surface mounting.
This Hettich guide channel 1222 is categorized as builders hardware and sliding door hardware, which positions it for projects where the door bottom needs a defined guide rather than relying on wall-only hardware. The 16 by 19 mm cross-section and 0.093 inch thick extruded aluminum construction create a compact but structured track, which works well where floor conditions call for a narrow channel guiding the no. 1211 guide roller. Because the channel is 16 feet long, it can span wide passage openings in commercial or residential layouts in a single length, which suits applications that benefit from continuous floor guidance across the full width of the sliding door movement. Pairing this guide channel 1222 with the no. 1211 guide roller integrates the bottom guide into a Hettich hardware system, which helps maintain predictable door tracking performance over the distance.
The continuous guide channel 1222 profile works with the no. 1211 guide roller in a dedicated track, which helps the roller remain engaged along the entire 16 foot run so the door moves on a consistent path. The 5/8 inch by 3/4 inch, or 16 by 19 mm, dimensions define the clearance envelope for the roller inside the 0.093 inch thick extruded aluminum walls, which supports reliable side guidance and reduces lateral play as the door cycles. Mortised floor installation places the channel down in a prepared recess, which helps align the upper edges with finished flooring to reduce trip points while still keeping the guide path centered under the door. Surface mounting uses the same aluminum section on top of the floor, which lets the installer rely on the existing surface elevation when a routed groove is not part of the work sequence.
Guide Channel 1222 provides a continuous floor track for the no. 1211 guide roller, which keeps the sliding door guided along a fixed path for smoother, more controlled movement.
The Hettich 50148 guide channel can be mortised into the floor or surface mounted, which gives flexibility to match the track installation to the site conditions and flooring plan.
This continuous guide channel 1222 is used with the no. 1211 guide roller, which is sized to run inside the 16 by 19 mm profile for consistent sliding door guidance.
The guide channel measures 5/8 inch by 3/4 inch, or 16 by 19 mm, which sets the channel height and width that interact with the 1211 guide roller and the surrounding floor.
The continuous guide channel 1222 is made from 0.093 inch thick extruded aluminum, which provides a defined, rigid track profile for the guide roller at the door bottom.
The Hettich guide channel 1222 section is 16 feet long, which lets installers run a continuous bottom track across wide sliding door openings without intermediate joints in the guide path.
Guide Channel 1222 from Hettich America Corporation combines a 16 foot continuous length, 16 by 19 mm profile, and 0.093 inch thick extruded aluminum construction used with the no. 1211 guide roller, so it provides a defined floor guide track for sliding door projects that follow the Hettich sliding door hardware system.
Sold In: 1 Each