Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Floor Pivot Bolt Assembly 1223 is a Hettich America Corporation sliding door hardware component that anchors into the floor and supports the door pivot at the bottom edge, helping the door track correctly in everyday use. This floor pivot bolt assembly is part of the Sliding Door Hardware product class, so it works as a structural element in the overall pivot system rather than as a decorative fitting, which keeps the door guided at the floor. The bolt assembly screws into a bottom pivot pin plate, creating a threaded connection that holds the pivot point firmly at the base of the door. The material is electro zinc plated cold rolled steel, so the bolt provides solid metal strength with a plated surface that suits typical interior construction conditions and normal sliding motion over time.
This floor pivot bolt assembly screws into the bottom pivot pin plate, so the installation workflow centers on threading the 3/8 inch diameter bolt into the prepared plate location until the pivot point is set at the required projection. The 2.5/16 inch length gives enough threaded engagement to hold the door pivot firmly while keeping the working end near the plate, supporting straightforward alignment of the door on the floor side. Because the bolt is electro zinc plated cold rolled steel, installers work with a familiar steel component that threads smoothly into a compatible plate and supports the day-to-day loading of a sliding door panel. As part of the sliding door hardware class from Hettich America Corporation, this floor pivot bolt fits into a coordinated set of components that together guide the door from floor level.
This floor pivot bolt assembly belongs to the Sliding Door Hardware category from Hettich America Corporation, so it functions at the floor level of a sliding door installation where a defined pivot point is required. The bolt screws into a bottom pivot pin plate, positioning the pivot right at the intersection of the floor plane and the door edge, which helps the panel stay supported as it moves within the system. With a 3/8 inch diameter, the bolt is sized for a correspondingly drilled or threaded plate interface, so the fit between the bolt and plate controls lateral play at the pivot area. The 2.5/16 inch length places the working portion of the bolt within a compact zone under the door, supporting door layouts where the floor hardware needs to remain close to the surface while still securing the pivot.
The electro zinc plated cold rolled steel construction gives the Floor Pivot Bolt Assembly 1223 a combination of formed steel strength and plated surface, so the bolt supports door weight at the pivot while presenting a treated exterior to the surrounding environment. This matters wherever the floor pivot is exposed to regular foot traffic around the base of the door, because the plated surface faces that area instead of bare steel. The threaded design that screws into the bottom pivot pin plate allows installers to position the pivot height within the available 2.5/16 inch length, which supports fine-tuning the relationship between the door bottom and the finished floor in a sliding system. Operating as a defined component in the sliding door hardware class, this Hettich 50149 floor pivot bolt assembly contributes to a controlled, repeatable pivot point that supports consistent sliding door movement across repeated installations.
Floor Pivot Bolt Assembly 1223 is a sliding door hardware component that forms the pivot point at floor level, so it supports the door base and guides movement within the hardware system.
The floor pivot bolt assembly screws into a bottom pivot pin plate, so installation involves threading the bolt into the plate until the desired pivot position at the floor is reached.
The 3/8 inch diameter defines the bolt thickness, so the bottom pivot pin plate needs a matching threaded or drilled interface to hold the bolt securely and control lateral play.
The 2.5/16 inch length sets how far the bolt can engage the plate, so it provides enough thread contact for strength while keeping the pivot hardware compact at the floor.
This Hettich floor pivot bolt is electro zinc plated cold rolled steel, so it combines formed steel strength with a plated surface suitable for typical indoor door hardware conditions.
The Hettich 50149 part number identifies this specific floor pivot bolt assembly, so it ties the component directly to the Floor Pivot Bolt Assembly 1223 sliding door hardware family.
Choose Floor Pivot Bolt Assembly 1223 when a defined floor-level pivot is required within a sliding door hardware layout from Hettich America Corporation, and the job calls for a 3/8 inch diameter, 2.5/16 inch long electro zinc plated cold rolled steel bolt that threads into a bottom pivot pin plate. This combination of measured dimensions, plated steel construction, and threaded engagement to the bottom pivot pin plate supports consistent sliding door movement and a controlled pivot point at the floor in builders hardware projects.
Sold In: 1 Each