Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bottom pivot pin plate 1224 anchors the bottom of a sliding door at the jamb and receives the no. 1223 floor pivot bolt assembly, creating a defined pivot point that controls how the door tracks at the bottom edge during operation.
This Hettich America Corporation plate is made from electro zinc plated cold rolled steel, so the mounting surface is rigid while the finish helps the metal handle typical interior door environments where sliding door hardware is used.
The plate measures 1 inch in width by 3-1/2 inches by 3-1/4 inches, giving a compact footprint that fits at the bottom of the door next to the jamb while still providing enough surface area for reliable attachment in the sliding door hardware layout.
The integrated bushing with a 17/32 inch height receives the no. 1223 floor pivot bolt assembly, guiding the pivot pin into a fixed vertical position so the bottom of the door turns smoothly around a repeatable center.
This bottom pivot pin plate 1224 is designed to attach directly to the bottom of the door next to the jamb, so the pivot location is fixed relative to the door edge, which helps align the panel with the adjacent frame and track components.
The plate dimensions of 1 inch by 3-1/2 inches by 3-1/4 inches determine how much door bottom area is engaged, which matters when laying out screw positions and edge distances to keep the plate centered under the stile.
The bushing height of 17/32 inch sets the vertical position where the no. 1223 floor pivot bolt assembly engages, which affects the gap between the door bottom and the floor, helping installers target a consistent clearance as part of the sliding door hardware setup.
The bottom pivot pin plate 1224 attaches to the bottom of the door next to the jamb, so it works at the hinge-side edge of a sliding door opening where a floor pivot is required instead of traditional side hinges.
Because it is part of sliding door hardware and receives the no. 1223 floor pivot bolt assembly, this plate fits into door systems that rely on a floor-supported pivot at the jamb, tying the door bottom to the floor pivot hardware rather than to a side-mounted hinge.
The 1 inch by 3-1/2 inch by 3-1/4 inch plate size concentrates the hardware at a defined zone at the bottom edge, which matters when coordinating with tracks, guides, or adjacent trim so the pivot area does not interfere with other components in the opening.
The electro zinc plated cold rolled steel construction places a formed steel plate at the working corner of the door, so the pivot connection occurs on a stiff base that supports repeated movement typical of sliding door operation in woodworking and building projects.
The ability of the plate to receive the no. 1223 floor pivot bolt assembly means the pivot connection is positively located by the bushing, which helps reduce play at the bottom of the door and supports smoother, more predictable sliding motion.
The 17/32 inch bushing height fixes how deep the floor pivot bolt assembly sits into the plate, so the lower edge of the door relates consistently to the floor level, which is important when aligning multiple doors or matching a specific threshold height.
The plate dimensions of 1 inch in width and 3-1/2 inches by 3-1/4 inches lengthwise define the footprint that must be available on the door bottom, which guides how the door stile is cut and drilled so the plate sits fully supported along the underside.
The electro zinc plating over cold rolled steel gives the plate a protective surface on a straight, flat steel base, so the mating face against the door remains true, which supports accurate seating of the no. 1223 floor pivot bolt assembly over the long term in service.
The bottom pivot pin plate 1224 attaches to the bottom of the door next to the jamb and receives the no. 1223 floor pivot bolt assembly, creating the pivot point that guides the door bottom.
The bottom pivot pin plate 1224 receives the no. 1223 floor pivot bolt assembly in its bushing, so the pivot bolt engages the plate and forms the rotating connection for the door bottom.
The bottom pivot pin plate 1224 is mounted to the bottom of the door next to the jamb, placing the pivot point at the jamb edge of the sliding door opening.
The bottom pivot pin plate 1224 has a plate size of 1 inch in width by 3-1/2 inches by 3-1/4 inches, defining the area it occupies on the underside of the door.
The bottom pivot pin plate 1224 is made from electro zinc plated cold rolled steel, providing a steel base with an electro zinc surface for typical interior sliding door use.
The bushing on the bottom pivot pin plate 1224 has a height of 17/32 inch, which sets the vertical engagement point for the no. 1223 floor pivot bolt assembly.
The bottom pivot pin plate 1224 from Hettich America Corporation provides a defined mounting point at the bottom of the door next to the jamb and receives the no. 1223 floor pivot bolt assembly, so it forms the core pivot connection in a floor-supported sliding door layout.
With its 1 inch by 3-1/2 inch by 3-1/4 inch electro zinc plated cold rolled steel plate and 17/32 inch high bushing, this sliding door hardware component offers the dimensions and material needed where a compact, steel bottom pivot plate is required.
Sold In: 1 Each