TopLine Grant double track 7005 is a double I-beam sliding door track with fascia that guides sliding doors along a fixed path so door movement stays controlled and predictable during everyday use. The track is part of the sliding door hardware range from Hettich America Corporation, so it is built around common sliding door layouts in woodworking and construction projects. The 8 foot track length spans longer cabinet or closet openings in a single run, which reduces joint interruptions where doors travel. The double profile design provides two running channels, supporting door configurations that demand parallel sliding movement on a shared header. The integrated fascia detail visually finishes the exposed track area, helping the finished installation present a clean front edge in visible locations. Mounting holes are spaced approximately every 11 inches on center, so the track body supports even load distribution along its length when fastened to a suitable structure.
The double I-beam track with fascia uses mounting holes spaced approximately every 11 inches on center, which sets a consistent fastening rhythm along the 8 foot length and supports predictable screw placement during layout. Because the fastener points repeat at this interval, the track can be positioned so that fixings align with framing or other solid backing along the mounting line. The 8 foot track length keeps the number of joints to a minimum across typical cabinet or closet widths, which helps the installer align the track straight with fewer reference breaks. The fascia portion runs the full length of the track, so once the track is secured in position, the visible front edge appears as a continuous strip above the sliding doors.
This sliding door hardware component is a double I-beam track with fascia in the Hettich America Corporation TopLine Grant range, so it suits projects that rely on sliding door movement rather than hinged door swing in built-in cabinetry or similar structures. The 8 foot length makes the track suitable for wider spans such as closet openings, long cabinet runs, or room divider headers that fall within that dimension. Because the profile is a double track, it supports layouts where two sliding doors share the same overhead line, which is common in bypass or overlapping door arrangements. The fascia helps the track integrate visually into finished woodworking or interior work where the hardware is part of the visible design. The builders hardware and sliding door hardware classification aligns this track with other structural components used on site-built or shop-built installations.
The double I-beam configuration establishes two parallel running channels inside one profile, so each sliding door has a dedicated path, which promotes consistent motion and helps reduce door interference during operation. Over an 8 foot run, that defined guidance helps the doors stay aligned with their opening edges, which supports even reveals when the doors are open or closed. The fascia bonded to this track format covers the I-beam form from the viewing side, which lets the installer focus on structural mounting while knowing the front will present as a continuous face in the finished space. The mounting holes approximately every 11 inches on center distribute fastening points, so holding force is spread across many locations along the track length rather than being concentrated at only a few points. That distribution supports the long-term stability of the track position relative to the supporting structure, which is important where sliding doors are used regularly. The clear product naming as TopLine Grant Double Profile 7005 with Fascia 8 foot and manufacturer part number 50550 helps the installer coordinate matching tracks across multiple openings or phases on the same project, maintaining consistent performance and appearance.
The product is a TopLine Grant double profile 7005 double I-beam track with fascia, so it functions as the main overhead running track in a sliding door hardware system.
The TopLine Grant double track 7005 is 8 feet long, which allows it to span wider openings with a single continuous track piece, reducing alignment joints.
The double I-beam profile provides two defined running channels, so each sliding door follows a controlled path, supporting smoother movement along the full track length.
The track has mounting holes approximately every 11 inches on center, creating repeated fastening points so the track can be secured evenly along its length.
The fascia covers the track profile from the viewing side, giving the installed sliding door header a more finished, continuous appearance in visible locations.
This Hettich America Corporation track is identified as TopLine Grant Double Profile 7005 with Fascia 8 foot and manufacturer part number 50550 for matching on future projects.
The TopLine Grant double track 7005 with fascia 8 foot uses a double I-beam profile, fascia front, and mounting holes approximately every 11 inches on center to support controlled sliding door travel across longer openings. The defined dual channels suit projects that call for two doors running on a shared overhead line, while the 8 foot length limits track joints that can disrupt movement or layout. With clear identification under Hettich America Corporation and part number 50550, this sliding door hardware component can be specified consistently across jobs where the same track performance and appearance are required.
Sold In: 1 Each