TopLine Grant Double Profile, 7005 With Fascia 12'

TopLine Grant Double Track 7005 For Sliding Doors

TopLine Grant double track 7005 is a double I-beam track with fascia from Hettich America Corporation, so it serves as the structural running surface and front trim for a sliding door system in one profile. The track length is 12 feet, giving continuous support for longer sliding door runs in residential or commercial woodworking projects. As part of the sliding door hardware class, this track is designed to work as the main upper guide path that carries door hangers along a straight line. The integrated fascia covers the front of the track, so the working components sit behind a clean metal face along the opening. With mounting holes positioned along its length, the track is prepared for direct fastening to a framing member or header. For shops that standardize on Hettich sliding door hardware, this TopLine Grant profile fits into a known product family.

Sliding Door Track Details That Support The Job

• The double I-beam track design provides two parallel running paths for sliding door hardware, which helps organize multi-door layouts along a single header.
• The integrated fascia on the track creates a finished front edge as the doors operate, so the functional hardware above the opening remains visually covered.
• The 12 foot track length spans wide openings in one continuous piece, which reduces joint locations along the run.
• Mounting holes approximately every 11 inches on center set a regular fastening rhythm, which helps plan screw layout across the supporting structure.
• The Hettich America Corporation brand ties this track to a recognized sliding door hardware line, which supports consistent component selection across projects.

Track Mounting Pattern And Fascia Fit In Use

This double I-beam track with fascia relies on mounting holes spaced approximately every 11 inches on center, so the installer follows a repeatable fastening pattern from one end of the 12 foot length to the other. That regular spacing helps balance load transfer into the supporting header or frame across the entire run. Because the fascia is built into the track profile, door movement happens behind a single continuous face, avoiding separate trim pieces along the top of the opening. As a component of sliding door hardware, this profile is set to carry door hanger trolleys that ride inside the I-beam shape. For woodworking and cabinet projects, the combination of track and fascia in one piece simplifies the upper line of the opening.

Using This Double I-Beam Track In Projects

Where This Sliding Door Track Profile Fits

This double I-beam track with fascia fits projects where a 12 foot sliding door run is required across a cabinet, closet, or similar opening. Because the track belongs to the sliding door hardware category, it is intended to sit at the top of the opening as the guiding element for door panels. The integrated fascia means the visible front edge above the doors is defined by the track itself, so the finished look follows the metal profile from one jamb to the other. When a layout calls for multiple doors running in front of each other, the double profile supports arranging hangers along two paths inside the same length of track. On projects supplied by Wurth Baer Supply, this Hettich America Corporation track can align with other builders hardware choices.

Why Track Length And Hole Spacing Matter

The 12 foot overall length of the TopLine Grant double track 7005 allows a single continuous header run, which helps keep door travel smooth across the opening without intermediate track joints. In sliding door work, eliminating joints along the run reduces potential irregularities where trolleys pass from one piece to another. The mounting holes approximately every 11 inches on center define where fasteners engage the structure, which supports evenly distributed attachment points instead of random spacing. That predictable pattern can speed layout when the track is held to a wood or structural member above the doors. Because the fascia is integral to the profile, alignment of the visible front edge is set by the track during mounting, tying appearance and function to the same straight reference. As a sliding door hardware part, manufacturer part number 50552 helps match this specific track profile within the TopLine Grant range when planning repeat work.

Common Questions About This Hettich Sliding Track

Select This Track For Long Sliding Door Runs

The TopLine Grant double track 7005 with fascia offers a 12 foot double I-beam sliding path with mounting holes approximately every 11 inches on center, so it supports wide openings with a planned fastening layout. The integrated fascia gives a continuous finished front edge while the I-beam interior carries the sliding hardware along the run. For projects that use Hettich America Corporation sliding door hardware, this 50552 track profile from Wurth Baer Supply fits into a coordinated hardware selection. Use this track when a single-piece sliding path and built-in fascia are priorities in the opening design.