Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Set of Fittings SD is a Hettich America Corporation sliding door hardware set designed for a 1-door application, so it gives you a defined group of parts for a single sliding door run. The set contains 2 runner carriages with precision ball bearing rollers, which carry the door along the track to support smooth guided movement during opening and closing. Height adjustable retaining pins on the runner carriages let you change the vertical position of the door relative to the hardware, which helps you align the door plane to the cabinet or wall opening. The set also provides 2 door fixing plates that create the connection between the sliding door and the moving hardware, keeping the door secured to the runners in use. Two end stops in the set define the door travel limits on the track, which helps control stop positions at each end of the run. A base glider supports the lower portion of the door on its path, maintaining guided motion along the base.
The Hettich Set of Fittings SD is built around 2 runner carriages with precision ball bearing rollers, so the door rides on rolling elements that support controlled movement along the sliding path. Because the runner carriages are fitted with height adjustable retaining pins, you can alter the installed door height relative to the track to tune clearances at the head or to match neighboring panels. The 2 door fixing plates in the set secure the door panel to the moving hardware points, turning carriage motion into door travel for the full opening. Two end stops at the track ends act as defined limits for that motion, setting consistent stop points during operation. With the base glider taking the lower door load along the base line, the sliding panel is guided at both top and bottom for predictable running behavior.
The Set of Fittings SD is defined in the description as a set that contains all components for a 1-door application, so it is suited to projects where a single sliding door panel is required on a run. Because it is part of the Hettich America Corporation sliding door hardware line, it fits into projects using Hettich systems where a matched group of parts tied to a known manufacturer is preferred. The 2 runner carriages with precision ball bearing rollers are intended for mounting at the running track, so they support the door along that upper line during every cycle. With 2 door fixing plates acting as the connection to the panel, the fittings set positions the door on those carriages so the upper track defines the path. The base glider referenced in the web description operates at the lower edge of the opening, giving the bottom of the door guided support along the base line while the top is carried by the carriages.
Hettich 9191124 fittings rely on runner carriages with precision ball bearing rollers, so the sliding door moves on rolling elements that support controlled and repeatable travel along the track. The height adjustable retaining pins on these runner carriages allow the door height to be changed after mounting, which is useful for aligning the panel with adjacent faces or fine-tuning clearance to the head or floor line. Two end stops from the set sit at the limits of travel on the track, defining how far the carriages - and therefore the door - can move in either direction, which keeps the operating range consistent each time the door is used. The 2 door fixing plates keep the panel firmly attached to the moving carriages, so adjustments at the runner level translate directly into visible panel position changes. With the base glider supporting the lower door edge along its route, the sliding panel is guided at both top track and bottom base, which contributes to a stable feel in the door as it moves along its defined path.
The Set of Fittings SD is described as containing all components for a 1-door application, so it is intended for sliding installations where a single door panel runs on the hardware.
The two runner carriages with precision ball bearing rollers carry the door along the track, providing guided rolling movement each time the door is opened or closed.
The height adjustable retaining pins on the runner carriages allow changes to the vertical position of the door, which helps align the panel with the opening and neighboring fronts.
The two door fixing plates create the connection between the sliding door and the runner carriages, so carriage movement translates directly into door movement along the track.
The two end stops supplied in the set define the end limits of carriage travel on the track, so the sliding door stops at consistent positions on each cycle.
The base glider supports the lower part of the sliding door along the opening, giving the bottom edge guided movement while the top is carried by the runner carriages.
The Hettich Set of Fittings SD groups 2 runner carriages with precision ball bearing rollers, 2 door fixing plates, 2 end stops, a base glider, height adjustable retaining pins, and fixing material for a 1-door application. Using these defined components from Hettich America Corporation under manufacturer part number 9191124 ties your sliding door run to a documented sliding door hardware set. Profiles are ordered separately according to the web description, so this set centers the running gear while the track components follow project requirements. For a single sliding panel where controlled movement, defined travel limits, and adjustable alignment are important, this focused fittings set provides the sliding hardware functions described.
Sold In: 1 Set