6' SD/HD wall-mount bracket describes a 6-foot wall-mounted support that works with SD and HD configurations, so it provides a defined mounting base for Grant TopLine sliding door hardware over that span. Being designed for Grant TopLine systems ties this bracket directly into that sliding door hardware family, which helps keep layout and component selection consistent on projects using that line. The product is identified as sliding door hardware, so it is intended to support sliding door tracks rather than swing or pivot hardware. The bracket is described as ideal for single or two-door applications that are not wanting or permitting attachment to the ceiling, so it offers a way to carry the track load from the wall when overhead structure is unavailable or undesirable. That gives installers a clear option when ceiling mounting is not practical.
The SAP description "WALL MOUNT BRACKET SD/HD,6FT" confirms this part is specifically a wall-mounted bracket, so it is intended to anchor to a wall surface and carry the load of the sliding door runner profiles along its 6-foot length. The web description calls it ideal for single or two-door applications not wanting or permitting attachment to the ceiling, so this bracket effectively replaces a ceiling-mounted track support when overhead mounting is constrained by structure or design. The note that it is suitable for door thicknesses from 25 mm to 50 mm ties bracket use to that door thickness range, so installers can align panel construction or selection to stay within that specification. Aluminium, anodised construction gives the bracket a stable, finished profile for mounting sliding hardware while keeping overall weight of the assembly low during handling and installation.
The product is described as ideal for single or two-door applications not wanting or permitting attachment to the ceiling, so it is well suited to wall-mounted sliding door runs where overhead structure cannot be used or where exposed ceiling track is not desired. Being identified as a 6' SD/HD wall-mount bracket for Grant TopLine ties it directly to that Grant TopLine sliding door hardware system, so it fits projects that are already designed around, or are being laid out for, that product family. The suitability for door thicknesses from 25 mm to 50 mm means it aligns with many interior sliding door panels in that thickness band, so residential or light commercial openings using panels in that range can be planned around this bracket. As sliding door hardware categorized as builders hardware, it fits into projects where a defined hardware line and part numbers, such as manufacturer part 9202898, are used for repeatable specification across multiple openings.
The 6 ft length defined in the SAP description means the wall-mount bracket offers a continuous support over that span, which helps maintain straight alignment for runner profiles and contributes to smoother door travel along the run. The web description states that runner profiles should be ordered separately, so the wall-mount bracket serves as the structural support onto which those runner profiles are attached, separating structural alignment from the rolling components. The note that end stops are required for all wall attachment applications shows that the overall wall-mounted sliding system is intended to be completed with end stops, so door travel is positively limited at each end of the run. The aluminium, anodised material described for the bracket provides a consistent, machined surface for fixing the sliding door hardware components, which supports repeatable positioning of tracks and related fittings across multiple identical installations that use the same Grant TopLine configuration.
The 6' SD/HD wall-mount bracket is described as ideal for single or two-door applications, so it serves as the wall-mounted support for one or two sliding door panels in a Grant TopLine system.
The SAP description identifies the bracket as 6 ft, so it provides a 6-foot continuous wall-mounted support length for attaching compatible Grant TopLine runner profiles.
The web description specifies suitability for door thicknesses from 25 mm to 50 mm, so sliding door panels in that thickness range are intended to be used with this bracket.
The bracket is described as aluminium, anodised, so it uses a lightweight metal profile with an anodised surface that supports mounting sliding door hardware components.
The description notes that runner profiles should be ordered separately, so this aluminium bracket provides the wall-mounted structural base onto which those Grant TopLine runner profiles are fixed.
The web description states that end stops are required for all wall attachment applications, so wall-mounted sliding runs using this bracket are intended to use end stops to define door travel limits.
The 6' SD/HD wall-mount bracket for Grant TopLine provides a defined 6 ft wall-mounted support made from aluminium, anodised, so it offers a stable structural base for Grant TopLine runner profiles in sliding door hardware projects. Its suitability for door thicknesses from 25 mm to 50 mm and its description as ideal for single or two-door applications not wanting or permitting attachment to the ceiling give clear parameters for where it fits into a sliding door layout. For projects built around Grant TopLine sliding door hardware where wall mounting is preferred, this bracket and its specified end-stop requirement offer a structured path to planning controlled door travel along the wall.
Sold In: 1 Set