
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
16' SD/HD wall-mount bracket is a Hettich America Corporation sliding door hardware component designed for Grant TopLine installations. This aluminium, anodised wall mounting carries SD and HD Grant TopLine runner profiles along the wall instead of the ceiling, giving a clear track path where overhead structure is unavailable or impractical. The 16 ft length supports longer runs in a single line, which helps keep the door travel smooth over wide openings for closets, room dividers, or similar applications. Because the wall mounting is part of the Grant TopLine system, it ties directly into that sliding hardware layout, helping installers keep components consistent across a project. Builders and serious DIY users can use this bracket to create a stable support for runner profiles while using standard wall construction as the fixing surface.
This Grant TopLine wall-mount bracket is described specifically as a wall mounting, so it is intended to carry the runner profiles directly along the wall line instead of hanging them from the ceiling. The bracket uses screws for wall mounting, which gives installers a straightforward mechanical fixing method into suitable wall structure. Because runner profiles are ordered separately, the wall mounting serves as the base element that establishes track height and straightness before profiles are attached. End stops are required for all wall attachment applications, so each wall-mounted run needs defined travel limits at the ends, helping control door movement at full open and full close positions. With these elements combined, installers can set the wall mounting, locate end stops, and then hang doors using Grant TopLine runners along a consistent reference line.
This Hettich America Corporation wall-mount bracket sits within the builders hardware and sliding door hardware classes, so its primary role is structural support in Grant TopLine sliding door assemblies. The web description identifies it as ideal for single or two-door applications, which aligns with common closet or passage openings where one or two sliding panels cover the span. Because it is suitable for door thicknesses from 25 mm to 50 mm, the same wall-mounted run can be applied across different panel constructions, from slimmer doors to heavier builds in that range. The configuration as a wall mounting makes it a strong option where attachment to the ceiling is not wanted or not permitted, such as in finished ceilings or where mechanical or structural constraints prevent overhead fixing. The 16 ft length supports long openings or continuous runs along a wall, which can be useful in wider wardrobe fronts or room divider layouts that need a single, uninterrupted sliding path.
The aluminium, anodised construction provides a rigid support element for the Grant TopLine runner profiles, while the treated surface helps maintain a clean interface where profiles contact the mounting over time. Using screws for wall mounting gives a positive, mechanical joint between the bracket and the wall, which helps hold alignment as doors cycle on the runner profiles. The requirement that end stops are used for all wall attachment applications means each installation can be set up with defined stop points, which supports predictable door travel and reduces impact at the ends of the run. Because runner profiles are ordered separately, installers can select appropriate Grant TopLine profiles for SD or HD use while using this same wall mounting as the structural base, which supports standardized installation steps across different door weights within the system. The 16 ft length reduces the number of joints between sections, which can help maintain straightness of the travel line and limit potential misalignment that might otherwise occur at track transitions along the wall.
The 16' SD/HD wall-mount bracket is described as a wall mounting for Grant TopLine sliding door hardware, so it is used as the wall support component within that system.
The wall-mount bracket is identified as ideal for single or two-door applications, meaning the wall-mounted run is suited to support one or two sliding door panels across an opening.
The wall-mount bracket is suitable for door thicknesses from 25 mm to 50 mm, covering a common range of sliding door constructions used with Grant TopLine hardware.
The Hettich 9202902 wall mounting uses screws for wall mounting, so it is mechanically fastened to the wall structure to support the runner profiles.
The product description states that end stops are required for all wall attachment applications, so each run has defined stop points to control door travel at the ends.
The wall-mount bracket is aluminium and anodised, providing a light structural member with a treated surface suited to interior sliding door hardware use.
The 16' SD/HD wall-mount bracket for Grant TopLine provides a dedicated wall mounting when attachment to the ceiling is not wanted or permitted, matching projects that rely on wall structure for sliding door support. Its suitability for door thicknesses from 25 mm to 50 mm and its role in single or two-door applications let installers handle a wide range of common openings using one continuous 16 ft wall run. With aluminium, anodised construction, screws for wall mounting, and the requirement for end stops on wall attachment applications, this Hettich America Corporation component forms a clear structural base for Grant TopLine runner profiles across longer spans.
Sold In: 1 Set