Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
3-1/8 inch wide 28 inch high square Rockwell single table leg stainless steel defines this leg as a sturdy, full-height support, giving work surfaces a consistent 28 inch base height that matches common table and counter projects. The Peter Meier Rockwell design as a single table leg lets installers build custom layouts, supporting runs or peninsulas without pre-set frames, which helps when working around walls, equipment, or existing casework. The stainless steel material provides a solid, work-oriented appearance that suits work surface and table installations in woodworking and shop environments. With a square shape at approximately 3.14 inches, this leg presents a broad face to the floor and top, helping spread loads across both contact areas. As part of the work surface and tables class, this Rockwell leg fits jobs where a defined, repeatable leg height is required from piece to piece.
The 4 9/16 inch (116mm) square mounting plate on this Rockwell stainless steel single table leg provides a broad interface to the underside of the work surface, helping spread loads into the top for a solid-feeling installation. The plate shape also offers clear edge references, which aids positioning when laying out multiple legs to keep rows straight and aligned. An adjustable foot with 1 1/8 inch of travel gives vertical adjustment at the floor, allowing fine-tuning of final height so the 28 inch nominal leg can adapt to minor floor unevenness while keeping the top level. That adjustment range supports installers when joining new tops to existing cabinetry or adjacent tables, where a small height shift is often needed for a flush transition. Together, the mounting plate and adjustable foot form a simple, top-and-floor interface that fits standard shop workflows.
This 28 inch stainless steel Rockwell table leg functions as a primary vertical support for work surface and tables, aligning with typical table and counter heights referenced in the web description. The square profile with approximately 3.14 inch width offers a visual and structural match for modern table designs, creating straight, clean lines along the support run. In projects where only one side of a top is anchored to cabinets or walls, the Rockwell single table leg fills the open corner or free end, helping carry load to the floor. The substantial 4 9/16 inch square mounting plate connects this leg to tops across a wide area, which is especially useful under heavier work surfaces common in woodworking and shop applications. For bar or counter installations that reference this table height range, this Rockwell component provides a consistent dimension to build around.
The adjustable foot with 1 1/8 inch range on this square mounting plate table leg gives installers a controlled way to correct for floor variations while holding the 28 inch structure close to design height, which supports tight seams where tops meet. That adjustment can be critical when tying a new work surface into an existing run, allowing the Rockwell leg to carry its share of weight without forcing racking into surrounding cabinetry. The manufacturer part number 880-7S-SS identifies this specific 28 inch Rockwell stainless steel model, helping shops reorder the same component for future expansions or replacement work so leg styles and heights remain consistent. As a single stainless steel table leg in the Peter Meier Rockwell line, it slots cleanly into hardware libraries where installers track legs by height, width, material, and mounting plate size. This consistency reduces layout rework when repeating a proven table or counter design across multiple jobs.
This Rockwell stainless steel single table leg is 28 inches high with a 1 1/8 inch adjustable foot, serving table and counter height projects within that adjustment range.
The 4 9/16 inch square mounting plate spreads load across a broad area under the top, helping create a solid connection and making layout easier with straight, square references.
The adjustable foot with 1 1/8 inch travel lets installers fine-tune final height, helping level tops over uneven floors and align new work surfaces with existing runs.
The SAP description lists this Rockwell leg at approximately 3.14 inches square, giving a substantial footprint at both the floor and mounting plate for stable support.
This leg is categorized under work surface and tables, table legs, making it suited to table, counter, and similar horizontal worktop support tasks.
Manufacturer part 880-7S-SS identifies this 28 inch stainless steel Rockwell leg, helping shops reorder the same style and height for consistent repeat or expansion projects.
This 3-1/8 inch wide 28 inch high square Rockwell single table leg stainless steel from Peter Meier brings a defined table-height structure, a 4 9/16 inch square mounting plate, and a 1 1/8 inch adjustable foot into one component. Those verified details support work surface and tables projects where a repeatable stainless steel leg is needed for clearances, alignment, and load transfer. For installations that rely on known heights and simple adjustments at the floor, this Rockwell leg offers a consistent part number and straightforward geometry to build around in shop drawings and on-site layouts.
Sold In: 1 Each