Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 1/2" pan head screw is built for mounting cabinet hinges and drawer slides where hardware lands close to the panel surface and longer screws would bottom out or blow through. The Antique Brass finish blends with warm-toned decorative hardware, making it a practical choice when fastener heads are visible through the hinge plate or slide bracket.
Most hinge and drawer slide screws run 5/8" or 3/4" long, which works fine on thick panel stock. But there are real installation situations where that extra length causes problems: a cabinet panel that has already taken a shelf pin hole nearby, a side panel where the hardware mounts close to a dado, a decorative end panel with a veneer back face, or any location where the tip of a longer screw would emerge through the opposite surface. The 1/2" length is the right call in those situations. It provides solid thread engagement in the upper portion of the panel without putting the tip at risk of breaking through.
Antique Brass is a warm, darkened finish that reads as a natural companion to oil-rubbed bronze, aged brass, and unlacquered brass hardware. When hinges or slide brackets have visible screw pockets, the head color shows. A zinc or chrome screw in an Antique Brass hinge creates a visible mismatch that the right installation screw eliminates. This screw is for interior cabinetry. The Antique Brass finish is not rated for wet or exterior environments.
Cabinet shops finishing high-end kitchens, bathrooms, and furniture pieces in warm metal tones reach for this screw when the hardware spec calls for Antique Brass and a standard zinc screw would stand out. Designers specifying aged or antique hardware families will recognize the difference it makes when the installation fastener disappears into the finish rather than contrasting with it. For replacement or touch-up work, it also serves homeowners who need to re-drive a stripped hinge screw and want to match the existing hardware appearance. Packed 1,000 to the box, the quantity suits both shop production runs and stocking for recurring hardware installations.
Yes. The #6 gauge and pan head are sized for the standard pilot holes found in most European hinge mounting plates. The flat pan head bears against the plate surface without requiring a countersink in the hardware itself.
For hinge and drawer slide mounting, yes. The coarse thread engages the panel material through the full threaded length of the screw. These fasteners hold hardware in place, not structural loads, and the 1/2" length is consistent with standard hardware mounting specifications for this application.
Yes. The coarse thread and sharp point are suitable for particleboard, MDF, and plywood cabinet panels, which are the most common substrates in residential cabinetry.
For interior cabinet use in a dry environment, the finish is durable through normal service. It is not intended for exterior applications or areas with prolonged moisture exposure.
A standard #2 Phillips bit. No specialty tooling is needed.
When the hardware is Antique Brass and the panel is thin, this 1/2" pan head screw handles both constraints cleanly so the installation looks intentional from the moment the door closes.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |