Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Drawer Front Mounting Kit gives you a simple way to mount and align drawer fronts while you build, renovate, or repair cabinetry projects, so drawer faces line up cleanly across a run. This Kreg Tool jig is designed to hold the front in position and set consistent gaps and reveals, which helps produce even sightlines and a professional look without repeated trial adjustments. A thick steel design with ribbed corners resists flex as you clamp, so the front stays where you set it while you fasten. Large clamp pads and a Grip Maxx anti-slip surface hold tight on the workpiece, helping protect the material as you tighten. Alignment marks built into the tools guide positioning, which supports repeatable layouts across multiple drawers in the same project.
This Kreg Tool jig uses left and right Drawer Front Mounting Tools to hold the front while you work, which supports even clamping on both sides of the drawer. Large adjustment knobs give you finger-tip control as you snug the tools to the parts, so you can fine-tune position before driving fasteners. The Grip Maxx anti-slip surface and large clamp pads maintain their hold as you tighten, helping the front stay aligned to the carcass edge. Seven Setup and Spacer Shims in different thicknesses support setting gaps and reveals consistently from opening to opening. The combination of steel construction, ribbed corners, and alignment marks provides a stable, repeatable setup for drawer front installation work.
The Kreg Tool Drawer Front Mounting Kit is built for projects where drawer fronts need to be mounted and aligned across cabinets, such as new builds, renovations, or repairs. The thick steel construction with ribbed corners resists flex, so it supports heavier or wider fronts during installation. Left and right Drawer Front Mounting Tools spread clamping force on both sides of the drawer opening, which helps keep the front parallel to the cabinet face as you fasten. Large clamp pads and the Grip Maxx anti-slip surface provide a broad, non-slip contact area, which helps hold both finished and unfinished fronts without marring as you work across a bank of drawers. Alignment marks on the tools act as visual guides, supporting consistent placement relative to cabinet edges or neighboring fronts on each opening.
The Drawer Front Mounting Kit uses seven Setup and Spacer Shims to control spacing, which lets you match gaps and reveals between drawers and doors without re-measuring every opening. Two 3/32 inch (2.3 mm) inset shims, two 1/8 inch (3.1 mm) shims, two 1/4 inch (6.3 mm) shims, and one 3/4 inch (19.1 mm) shim provide a range of thicknesses for common drawer spacing and insets. Using these shims with the jig helps you repeat the same reveal on each front, which is important when working across tall pantry cabinets or wide drawer stacks. Alignment marks on the mounting tools reinforce shim use by giving a clear sightline for position, so the front can be set relative to the cabinet frame or case edges. Together, the steel body, Grip Maxx surface, shims, and alignment marks help reduce layout time and support uniform drawer appearance on finished work.
The Drawer Front Mounting Kit KCS-DFMT-PRO from Kreg Tool is a jig designed to mount and align drawer fronts while setting consistent gaps and reveals during building, renovating, or repairing projects.
The Drawer Front Mounting Kit uses thick steel with ribbed corners to resist flex, which keeps the drawer front stable under clamping pressure while you fasten it to the drawer box or cabinet.
The Grip Maxx anti-slip surfaces on the Drawer Front Mounting Kit clamp pads hold tight to the workpiece and help protect the material, which supports secure positioning during tightening and loosening.
The Drawer Front Mounting Kit uses seven Setup and Spacer Shims in various thicknesses, which are placed between parts to establish consistent insets, gaps, and reveals across multiple drawers.
The Drawer Front Mounting Kit has alignment marks that act as visual guides, which helps position drawer fronts accurately relative to cabinet edges and neighboring fronts.
The Drawer Front Mounting Kit uses large adjustment knobs for tightening and loosening, which speeds repositioning of the jig as you move from one drawer front to the next.
The Kreg Tool Drawer Front Mounting Kit provides a straightforward way to mount and align drawer fronts while setting consistent gaps and reveals with the supplied steel jigs and shims. Thick steel construction with ribbed corners, Grip Maxx anti-slip surfaces, and large clamp pads work together to hold fronts steady as you fasten. Alignment marks and multiple shim sizes give you practical control over placement and spacing. For drawer installation tasks during building, renovating, or repairing work, this jig helps deliver uniform drawer appearance and predictable results on each project.
Sold In: 1 Each
