Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
small metal single roller catch from Amerock Corporation provides a compact way to hold light cabinet doors closed, which helps keep doors from drifting open during everyday use. The catch body measures 1-3/8 inches long, so it fits small face frames and tight cabinet layouts where space around the door opening is limited. As part of Amerock Corporation catches in the locks and latches category, this unit is designed as a simple mechanical hold for doors rather than a keyed lock, which suits residential and light commercial cabinetry. The bright zinc finish on the metal body presents a clean, neutral look that blends with many hinges and pulls, helpful when working across mixed hardware lines. With its small form factor and straightforward roller action, this catch works well anywhere a modest closing force is enough to keep a cabinet door seated.
The base size of 1-1/4 inches by 1-3/8 inches defines the footprint you lay out on the cabinet frame, which helps when setting consistent screw locations across multiple doors in a run. With a catch height of 5/8 inch, the roller sits relatively low, which reduces how much you need to adjust door reveals to get proper contact between the strike and roller. The 1-3/4 inch strike length on both inset and overlay versions gives some front-to-back forgiveness, so normal woodworking tolerances still allow the roller to find the strike face. Inset door strikes at 1-1/4 inches wide and overlay strikes at 1-1/8 inches wide give slightly different coverage, which allows you to pick the geometry that best matches the way the door sits against the frame.
The Amerock Corporation BP98232G roller catch is part of the catches class within locks and latches, which positions it for general cabinet and furniture doors that need a positive close without a lock. Its compact 1-3/8 inch long metal body suits smaller doors, utility cabinets, or built-ins where space is at a premium, helping you avoid interference with shelves or dividers just behind the face frame. The bright zinc finish works across a range of shop and site environments, matching many common cabinet hardware finishes closely enough for concealed applications. Strike options for inset and overlay or flush doors allow this one part number to support different door layouts, simplifying planning on projects that mix face-frame overlays with inset doors in the same space.
The 1-1/4 inch by 1-3/8 inch base footprint gives a predictable layout reference, so once you establish a mounting pattern on one cabinet, it can be repeated quickly along a bank of doors. A 5/8 inch overall height means the roller does not project far, which helps maintain even reveals while still generating enough contact with the matching strike sizes. With inset strikes at 1-3/4 inches by 1-1/4 inches by 1/2 inch and overlay strikes at 1-3/4 inches by 1-1/8 inches by 1/2 inch, the mating parts share consistent length and height, making it easier to standardize jig settings while only shifting width for the door style. Being sold in both broken and full box quantities supports shop workflows, allowing one-off replacements or small jobs to use the same BP98232G catch that is also ordered in volume for larger runs. A discount available for full box orders ties directly into cost control on production work where this roller catch becomes a standard detail.
The small metal single roller catch is described for general cabinet use where a catch from the locks and latches category provides a simple, non-locking hold for light doors.
The 1-1/4 inch by 1-3/8 inch base size defines a compact footprint, helping the catch sit on narrow rails or stiles without crowding hinges or door edges.
The inset strike at 1-3/4 by 1-1/4 by 1/2 inches suits doors set inside the frame, while the 1-3/4 by 1-1/8 by 1/2 inch strike suits overlay or flush doors sitting on the frame.
The 5/8 inch height keeps the roller relatively low, helping the strike meet the roller while preserving consistent reveals and minimizing door adjustments.
The BP98232G designation identifies this specific Amerock small metal single roller catch, which helps match drawings, reorder correctly, and standardize hardware across projects.
This roller catch is sold in both broken and full box quantities, with a discount for full box orders, which supports both small jobs and larger production runs.
The Amerock Corporation small metal single roller catch BP98232G combines a compact 1-3/8 inch long body with clearly defined base and strike sizes, which helps lay out consistent mounting points across cabinets. With distinct strikes for inset and overlay or flush doors, the same catch model serves different door styles, simplifying hardware choices on mixed installations. Availability in both broken and full box quantities, with discount available for full box orders, aligns this bright zinc roller catch with both repair work and production cabinet runs. For projects that call for a straightforward catch in the locks and latches category, these dimensions and ordering options support a dependable, repeatable hardware choice.
Sold In: 1 Each