Salice Series CU Silentia hinge is a concealed cabinet hinge designed for face-frame applications where a 1-9/16 inch overlay is required. This hinge uses a dowel mounting design, so the hinge cup is secured in pre-drilled dowel holes in the door. The hinge belongs to the Salice Series CU Silentia family, tying it to a line focused on controlled soft closing performance. As a 106 degree opening hinge, it lets doors swing open to a wide, practical angle while keeping movement controlled at the end of travel. The 11 mm cup depth stays consistent across all hinges in this line, so the door machining pattern remains uniform from cabinet to cabinet. The hinge is manufactured from nickel plated steel, so the working components are metal and protected by the nickel finish. The product is supplied under manufacturer part number CUR3ED9 from Salice America.
This Salice Series CU Silentia hinge uses a dowel cup design with an 11 mm cup depth, so the door requires a consistent 11 mm deep bore for proper seating. The possible drilling distance on the door ranges from 2.5 mm to 6.0 mm, so the cup hole can be positioned within that range to achieve the required overlay and edge margin. That drilling distance window also supports adjustments to door placement when working with varying door thicknesses. The 1-9/16 inch overlay rating defines how far the door covers the face frame, so planning the case and door layout around that overlay keeps reveals uniform. As a concealed cabinet hinge, all this geometry works behind the door, supporting a clean exterior look while providing repeatable installation points for production or field work.
This hinge is specified as a 1-9/16 inch overlay face-frame hinge, so it serves projects where the door needs to cover that specific amount of the face frame. The 106 degree opening capability fits cabinet layouts where a wide door swing is beneficial, such as base or wall cabinets needing straightforward interior access. Because it is a concealed cabinet hinge, it is suited to applications where visible surface hinges are not desired and a cleaner frontal appearance is important. The 11 mm cup depth and 2.5 mm to 6.0 mm drilling distance window are shared characteristics of hinges in this line, so runs of doors using this family can be machined with the same drilling depth while only adjusting the drilling distance as required. The nickel plated steel construction aligns with typical cabinet shop environments, so these hinges integrate naturally into standard casework built with face frames.
This Salice Series CU Silentia hinge is described as a 2 cam adjustment hinge, and also as a 3 cam adjustable hinge, so the design supports multi-directional door adjustment at the hinge. That adjustment capability is valuable for fine-tuning reveals across a bank of doors and correcting small alignment variations after doors are hung. The hinge features an integrated soft close decelerating mechanism directly on the hinge arm, so door movement slows at the end of travel for controlled closing. This decelerating mechanism can be easily deactivated using an activation switch that is clearly visible on the front of the unit, so the soft closing action can be turned off when a different soft closing strength is desired. Having the switch clearly visible at the front of the hinge simplifies identifying the control point during installation or later adjustments, supporting repeatable results across multiple cabinets using the same hinge family.
This hinge is a concealed face-frame hinge with a 1-9/16 inch overlay, so it is intended for cabinets built with face frames where that overlay dimension is part of the design.
The hinge has a 106 degree opening angle, so cabinet doors can swing to a wide position that helps with interior access while staying within a defined movement range.
The CUR3ED9 hinge uses an 11 mm cup depth, so the hinge bore in the door is machined to that depth to seat the cup properly and align the hinge geometry.
The hinge supports a drilling distance from 2.5 mm to 6.0 mm, so the cup hole can be located within that range to match door edge margins and overlay requirements.
The hinge contains a decelerating mechanism on the hinge that slows the door at the end of closing, providing soft close action directly within the hinge hardware.
This hinge offers an integrated soft close mechanism that can be deactivated using the activation switch on the front, so closing behavior can be adjusted to project needs.
This Salice Series CU Silentia hinge combines a 1-9/16 inch overlay, 106 degree opening, and an 11 mm cup depth in a concealed, nickel plated steel design, so it matches face-frame projects needing those specific dimensions. The dowel cup construction and 2.5 mm to 6.0 mm drilling distance window tie the hinge to straightforward door machining patterns. The integrated soft close decelerating mechanism, with a clearly visible activation switch on the front, supports projects where control over closing strength is important. For cabinets where consistent overlay, concealed hardware, and adjustable soft closing are central requirements, this CUR3ED9 hinge from Salice America provides a defined set of geometry and adjustment features to build around.
Sold In: 300 Each