Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Laurey 87920 Melrose T-Bar Knob is a matte black steel T-knob designed to upgrade cabinet and drawer fronts with a clean, modern look. The knob uses a 2 inch center-to-center layout, which sets the posts at a standard spacing that streamlines layout on new work or straightforward replacement on many existing fronts. The T-bar form creates a comfortable horizontal grip, helping users pull doors and drawers open with a solid handhold instead of grasping a small round point. Because the knob is finished in matte black, it visually anchors lighter cabinetry and blends into darker finishes, so installers can match a wide range of design schemes while keeping hardware consistent across a project.
This Laurey steel T-bar knob is specified as a 2 inch center-to-center T-knob, so the mounting holes are set 2 inches apart along the bar, which simplifies drilling patterns on new cabinet layouts that follow this spacing. The 127 mm overall length means the bar extends beyond the mounting points on both sides, so when positioned on drawers or doors it visually fills more of the front while still lining up to the 2 inch centers for mounting. With a height of 32 mm, the knob projects off the face far enough to clear typical cabinet door edges, helping hands grip from above or below. The 12 mm width and 10 mm depth define a compact, streamlined bar, so the knob occupies minimal space while still standing out as a deliberate design element.
The Laurey 87920 Melrose T-Bar Knob is part of the Melrose Collection, which supports use on coordinated cabinet runs where matching hardware is important for a finished appearance. The knob belongs to the decorative knobs category, so it is intended for cabinet and drawer fronts rather than interior structural roles. Its matte black finish helps it perform well visually on both painted and stained cabinetry, allowing installers to carry the same knob from kitchen bases to uppers and into adjacent built-ins for a unified look. The 127 mm length creates a substantial horizontal line on doors and drawers, so a bank of these knobs reads as a continuous design element along a run, which can tie together varying cabinet sizes.
Because the knob uses a 2 inch center-to-center layout, it suits installations where fronts are drilled to that spacing, supporting straightforward mounting during shop fabrication. The steel construction keeps the bar rigid at its 127 mm length, which helps it resist flex during pulls on heavier drawers. At 32 mm high, the knob lifts off the face enough for comfortable grasping even when mounted near neighboring doors, which is useful on tight-face-frame layouts. The 12 mm width and 10 mm depth create a slim, linear pull that adds definition without crowding narrow rail or stile sections, allowing clear separation between the hardware and surrounding trim.
The specified 2 inch center-to-center spacing on this T-knob gives a fixed distance for drilling, which helps fabricators set up jigs that repeat the same hole pattern across multiple fronts with minimal layout variation. The 127 mm overall length works with that spacing by extending the grip area beyond the posts, so users can grab the bar toward either end while the load still transfers back through the same mounting points, maintaining stability. With a 32 mm height, the knob projects a consistent distance from the face, so when rows of doors or drawers are aligned, the bars sit at the same stand-off, contributing to a uniform shadow line along the cabinetry.
The 12 mm width and 10 mm depth keep the bar slim enough that multiple knobs on a wide drawer front do not visually overpower the panel, while still offering enough contact area for users to grasp quickly. The matte black finish over steel keeps the appearance uniform from knob to knob along a long run, helping installers deliver a cohesive finished line without color shifts between pieces. Being part of the Melrose Collection ties this T-bar knob to that named family, which aids designers and builders working to match other Melrose elements in adjoining rooms or future additions.
The Laurey 87920 Melrose T-Bar Knob is 127 mm long, 32 mm high, 12 mm wide, and 10 mm deep, giving a substantial yet streamlined pull area on doors and drawers.
The 2 inch center-to-center dimension on this knob means the mounting holes are spaced 2 inches apart, which defines the drilling pattern for installation on cabinet fronts.
The Laurey Melrose T-knob is constructed of steel, providing a solid metal body that supports repeated pulling force on frequently used cabinets and drawers.
The Laurey 87920 T-bar knob has a matte black finish, creating a non-gloss surface that pairs well with a wide range of cabinet colors and styles.
This matte black T-bar knob is part of the Melrose Collection, helping designers and installers coordinate hardware style across multiple cabinet areas.
This Laurey steel T-bar knob is categorized as decorative hardware for cabinets and drawers, so it functions as the primary pull point on fronts.
The Laurey steel series 87920 Melrose matte black T-bar knob offers a 2 inch center-to-center layout, a 127 mm overall length, and a durable steel body, giving installers a predictable, sized pull for cabinets and drawers that need consistent hardware across a project.
Sold In: 1 Each
