Rev-A-Shelf 447 Maple 8-3/4" Base Cabinet Tray Divider and Foil Wrap Organizer with Soft-Close Slides, 447-BCSC-8C

Choose a Rev-A-Shelf base cabinet tray divider

Rev-A-Shelf base cabinet tray divider is a pull-out organizer built for storing odd sized kitchen items in a base cabinet. The Rev-A-Shelf 447 Series model RS447-BCSC-8C is made with a solid maple base and back, includes adjustable tray dividers, and uses soft-close slides for controlled movement. This foil wrap organizer also includes adjustable door mount brackets that allow up to 5 inches of flexibility for installation on different door styles. As a base cabinet organizer, it is designed to pull forward with stability, using patented tri-slides that help prevent side-to-side motion. The unit comes fully assembled and includes a center tray divider and T-Bar so the storage area can be arranged for your cabinet contents.

Use a base cabinet pull-out organizer better

• Solid maple base and back - Rev-A-Shelf uses maple construction in the main body to provide a sturdy platform for trays, wraps, and other narrow kitchen items.
• Fully assembled organizer - The base cabinet pull-out organizer arrives assembled, which can reduce setup time during cabinet installation.
• Adjustable tray dividers - The dividers let you set the spacing for different item widths instead of being locked into one layout.
• Center tray divider and T-Bar included - These included parts help customize the interior for foil, wrap boxes, trays, and other tall or awkward items.
• Adjustable door mount brackets with up to 5 inches of flexibility - The brackets help installers align the cabinet door more easily across different door styles.
• Patented tri-slides - Rev-A-Shelf tri-slides help prevent side-to-side motion so the organizer stays stable when pulled out.
• Soft-close slides - The slide system helps the organizer close in a controlled, quieter motion during daily use.
• 100 lb weight capacity - The organizer is rated for up to 100 lb, which helps support heavier kitchen storage loads within the stated limit.
• Minimum cabinet opening of 8-1/2 inches wide by 21-3/4 inches deep by 19-5/8 inches high - The RS447-BCSC-8C fit requirement gives buyers a clear starting point before ordering.

Confirm foil wrap organizer fit and contents

Key specs to confirm: The RS447-BCSC-8C is an 8-3/4 inch Rev-A-Shelf 447 Series base cabinet organizer intended for a minimum cabinet opening of 8-1/2 inches wide, 21-3/4 inches deep, and 19-5/8 inches high. Buyers should confirm the actual cabinet opening, interior depth, and clear height before ordering. Because this is a door-mounted pull-out style unit, also confirm that the door style and surrounding hardware allow proper movement. The product data verifies a 100 lb weight capacity. Any other performance, compliance, or installation details not listed in the product data should be confirmed with the manufacturer or technical documentation.

What's included: The product data verifies a fully assembled organizer, adjustable tray dividers, adjustable door mount brackets, a center tray divider, T-Bar, solid maple base and back, patented tri-slides, and soft-close slides.

What to verify before ordering: Confirm your base cabinet opening meets or exceeds the listed minimum dimensions, check that your cabinet door can accept the door mount brackets, verify interior clearance for pull-out travel, and review manufacturer installation guidance and local building requirements where applicable.

Compare soft-close cabinet organizer details

Match the base cabinet organizer to storage

This soft-close cabinet organizer is built for buyers who need to control narrow, upright, or uneven kitchen items that do not stack well on standard shelves. A common use case is a base cabinet near the cooking area where foil, plastic wrap, parchment, cutting boards, serving trays, and similar pieces tend to slide around or get buried behind larger items. In that setting, a Rev-A-Shelf base cabinet tray divider gives each item a defined slot and brings the contents forward in one motion.

The RS447-BCSC-8C is especially relevant when the cabinet opening is narrow but deep enough to benefit from a pull-out format. The verified minimum opening is 8-1/2 inches wide, 21-3/4 inches deep, and 19-5/8 inches high. That makes fit confirmation the first step. If your opening is smaller, or if hinges, face frames, or interior obstructions reduce clearance, the organizer may not install correctly. Buyers should measure the true usable opening rather than relying only on nominal cabinet size.

For installers, the fully assembled format can simplify the job. The adjustable door mount brackets offer up to 5 inches of flexibility, which helps when aligning the attached door on varying styles. The adjustable tray dividers and included center tray divider and T-Bar also matter in real use. They allow the maple tray divider organizer to adapt as storage needs change, rather than forcing one fixed layout. If the cabinet is used for wraps today and trays tomorrow, the organizer can be rearranged to match.

Stability is another practical concern with a base cabinet pull-out organizer. The product data states that Rev-A-Shelf includes patented tri-slides that prevent side-to-side motion and provide complete stability when the unit is pulled out of the cabinet. Combined with the soft-close slides, that can help the organizer feel more controlled during repeated daily use. The stated 100 lb weight capacity gives buyers a verified load figure, but any unusual loading pattern or installation condition should still be checked against manufacturer guidance.

Compare this foil wrap organizer with standard pull-outs

Not every pull-out organizer is arranged for tall and narrow kitchen items. A standard shelf-style pull-out is often better for grouped containers or bulk goods, while a foil wrap organizer with dividers is intended to separate items vertically and keep them easier to identify. That difference matters when the main goal is quick access to wraps, trays, and other pieces that tip over on open shelving.

This Rev-A-Shelf 447 Series organizer also stands apart in a few verified ways that buyers can evaluate directly. The body uses a solid maple base and back. The unit comes fully assembled. The divider layout is adjustable rather than fixed. Door mount brackets are included and offer up to 5 inches of flexibility. The organizer also includes a center tray divider and T-Bar for storage customization. Those details support a more tailored installation than a basic insert that requires separate setup or leaves little room for adjustment.

When comparing options in general, buyers should focus on measured cabinet opening, slide style, included mounting hardware, and whether the organizer is built for the exact items being stored. For this product, the fit dimensions and included components are clear in the verified data. If you need additional details such as exact exterior unit dimensions, replacement parts, or installation document references, those should be confirmed before purchase rather than assumed.

Ask fit questions before cabinet install

Order the maple tray divider organizer confidently

Maple tray divider organizer buyers should focus first on cabinet fit, then on storage layout and included hardware. This Rev-A-Shelf unit gives you a fully assembled base cabinet pull-out organizer with adjustable tray dividers, a center tray divider, T-Bar, adjustable door mount brackets, and soft-close slides. Before purchase, confirm that your cabinet opening meets the listed minimum dimensions and that your door style allows proper mounting and travel. If you need details beyond the verified product data, review the manufacturer documentation before ordering.