Rev-A-Shelf waste pullout gives a kitchen cabinet a concealed trash pull-out with a fully assembled maple carriage and one 35 quart silver bin. This bottom mount trash pullout is part of the Rev-A-Shelf 4WCBM Series and includes Rev-A-Motion, a gas spring assisted soft-open and soft-close mechanism with 1 inch overtravel. For buyers comparing a garbage pullout or planning a rev a shelf cabinet upgrade, this model is built for a 12 inch application and works with face frame and frameless construction. The unit is designed to fit 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes. A storage area behind the waste basket is included on 35 quart units, which can help keep small liners or cleaning items close at hand.
Key specs to confirm: This Rev-A-Shelf bottom mount trash pullout is listed for a 12 inch application and includes one 35 quart bin. The 4WCBM Series is designed for face frame sizes of 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch, and it can also be used in frameless construction. Product data states the unit can handle a maximum weight of 150 lb. Before purchase, confirm your cabinet opening, interior depth, door attachment method, and whether the bottom panel can support the installed load. If any dimensional, safety, or compliance details are not shown in your project documents, confirm them with the manufacturer or current technical documentation.
What's included: One fully assembled maple waste pullout frame, built-in door mount brackets, Rev-A-Motion soft-open and soft-close hardware, and one 35 quart metallic silver plastic bin are verified as included.
What to verify before ordering: Check cabinet width class, inside opening, face frame size or frameless layout, floor mounting surface, door mounting alignment, and whether you need a replacement bin or additional storage access behind the bin for your use.
A bottom mount trash pullout like this is often chosen when a buyer wants to move a freestanding trash can off the kitchen floor and into a cabinet. In a working kitchen, that means cleaner sight lines, easier sweeping, and a more controlled place for daily garbage. This Rev-A-Shelf trash can pullout is built around a maple dovetail carriage and one 35 quart silver bin, so it fits buyers who want a single-bin setup rather than a split recycling layout.
For installers, the fully assembled design can save time compared with systems that require more field assembly. Built-in door mount brackets also matter because they reduce the need to source separate attachment parts for a matching cabinet front. The bottom mount format is useful when cabinet sides are not ideal for side-mounted hardware or when a buyer wants the support located at the cabinet base.
The Rev-A-Motion mechanism is a practical feature for homes that use the cabinet many times a day. Product data verifies gas spring assisted soft-open and soft-close action, plus 1 inch overtravel. In daily use, that means the trash pull-out is designed to move with controlled opening and closing while giving a bit more access to the bin. The 35 quart version also includes storage behind the bin, which can help keep liners, gloves, or small cleaning items nearby.
This garbage pullout is also a fit-driven purchase. It is intended for a 12 inch application and is designed to install in 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes as well as frameless construction. Buyers searching revashelf, rev a shelf, or garbage pull out options should still confirm actual cabinet opening dimensions and door clearance before ordering. If your project includes unusual hinge positions, interior obstructions, or a custom door style, those details should be checked against current installation guidance.
When buyers compare a premium wood-framed trash pull-out with a basic pullout frame, the differences usually come down to assembly level, motion control, cabinet compatibility, and included parts. This Rev-A-Shelf waste pullout arrives fully assembled, uses a maple dovetail carriage, and includes built-in door mount brackets. Those are concrete details that can help reduce install steps and keep the setup consistent from one cabinet to the next.
Another point of comparison is access. Product data confirms 1 inch overtravel, which can improve reach to the bin compared with pullouts that stop short of the cabinet face. The verified soft-open and soft-close action is also relevant for kitchens where the unit will be opened often throughout the day. Instead of focusing on style claims, buyers can compare how the mechanism, mounting method, and included bin match the job.
For fit, this model supports both face frame and frameless construction, which gives it broader application than pullouts limited to one cabinet style. The listed face frame range is specific, so that is a useful checkpoint during planning. For maintenance and long-term use, replacement bins are sold separately according to the product data. That can matter for buyers who want a serviceable waste basket system rather than a one-piece assembly that is harder to refresh later.
This Rev-A-Shelf garbage pullout is designed for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes, and it also works with frameless construction.
This product is a bottom mount trash pullout, so the assembly mounts at the cabinet bottom.
This Rev-A-Shelf trash pull-out includes one 35 quart metallic silver plastic bin.
This Rev-A-Shelf waste pullout is listed as fully assembled from the factory.
This pullout frame includes built-in door mount brackets to support cabinet door attachment.
This Rev-A-Shelf trash can pullout uses Rev-A-Motion with gas spring assisted soft-open and soft-close action.
This 35 quart unit includes a storage area behind the bin according to the product data.
This bottom mount trash pullout is listed for a 12 inch application, but cabinet opening and interior clearances should be confirmed before purchase.
This single-bin waste basket can be used for trash or recycling, depending on how you choose to organize the cabinet.
This trash pull-out should be installed following manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf trash can pullout is a fit-focused choice for buyers who want a fully assembled maple bottom mount unit with one 35 quart silver bin. Before ordering, confirm your 12 inch cabinet application, face frame size or frameless layout, bottom mounting surface, and door attachment alignment. Verified included components are the assembled pullout frame, built-in door mount brackets, Rev-A-Motion hardware, and one bin. If your project depends on exact interior dimensions or special clearances, check current manufacturer documentation before purchase.
Sold In: 1 Each