Rev-A-Shelf trash pull-out gives kitchen cabinets a concealed waste storage setup with a maple bottom mount frame and two 50 quart silver metallic bins. This Rev-A-Shelf bottom mount trash pullout is part of the 4WCBM Series and comes fully assembled for faster jobsite prep. The built-in Rev-A-Motion mechanism uses gas spring assistance for soft open and soft close action, and it also provides 1 inch of overtravel for easier access. This garbage pullout is designed for face frame cabinets in 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch sizes, and it also works with frameless construction. For buyers planning separate waste and recycling use, the dual-bin layout helps keep sorting simple while keeping the waste basket area out of sight.
Key specs to confirm: This bottom mount trash pullout is a 17-1/4 inch maple pull-out with two 50 quart bins. Confirm that your cabinet opening, interior depth, and door clearance can accept a dual-bin pull-out of this width and style. This Rev-A-Shelf unit is designed for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes, and it also works with frameless construction. Verify that your cabinet floor is suitable for bottom mounting and that your planned load stays within the verified 150 lb maximum. If you need code, compliance, or other technical details not listed here, those must be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled maple waste pullout frame, two 50 quart silver metallic plastic bins, built-in door mount brackets, and the integrated Rev-A-Motion soft open and soft close mechanism.
What to verify before ordering: Check cabinet opening width, interior depth, face frame size or frameless construction, door attachment plan, floor mounting condition, and whether a two-bin trash and recycling layout is the right fit for your cabinet.
A double-bin garbage pullout fits well in kitchens where users want one concealed place for everyday trash and recycling. The two 50 quart bins provide a matched layout for sorting without leaving freestanding cans on the floor. For remodel work, that can help clean up traffic paths and keep waste handling inside the cabinet run.
This Rev-A-Shelf waste pullout is built around a maple carriage with dovetail construction, so it suits cabinet interiors where wood components are preferred over exposed wire frames. The bottom mount trash pullout format also helps when the installer wants the system supported from the cabinet floor rather than side walls. Because the unit comes fully assembled, it can simplify prep for installers who want to reduce on-site assembly steps.
The built-in Rev-A-Motion mechanism matters in everyday use. Gas spring assisted soft open and soft close movement helps control travel in both directions, and the verified 1 inch overtravel gives extra access when lifting bins out, changing liners, or wiping down the cabinet area. In a busy kitchen, that added travel can make the rear area of each waste basket easier to reach.
Fit is still the main buying checkpoint. This revashelf pull-out is designed for face frame sizes of 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch, and it also works with frameless construction. Buyers should still confirm cabinet opening dimensions, interior depth, and door clearance before ordering. If the cabinet uses a door-mounted front, the built-in door mount brackets support that setup, but the exact cabinet conditions should be checked against installation guidance. For projects where a garbage pull-out must carry heavy daily use, staying within the verified 150 lb maximum is also important.
When buyers compare one cabinet waste system to another, the useful differences are usually mounting style, bin size, frame material, assembly level, and motion control. This Rev-A-Shelf trash can pullout is clearly defined on those points. It is a bottom mount unit, it includes two 50 quart bins, it uses a maple dovetail carriage, and it ships fully assembled. Those are concrete details that help narrow whether the unit fits the cabinet and the installation plan.
Another comparison point is cabinet compatibility. Some pull-outs are limited to one cabinet style, while this unit is designed for several face frame sizes and for frameless construction. That can help buyers standardize hardware choices across mixed cabinet jobs, provided each opening is checked first. The integrated door mount brackets are also useful because they are built into the frame rather than treated as an unknown add-on.
Motion and access also matter in side-by-side review. The verified soft open and soft close action, along with 1 inch overtravel, gives this garbage pullout a controlled feel and a little more reach than a basic slide-out format. Buyers who want a rev a shelf waste pullout for a visible kitchen upgrade should focus on those measurable details instead of assumptions. If you need exact slide specifications, replacement part details, or documentation beyond the verified facts here, confirm those items with the manufacturer before purchase.
This Rev-A-Shelf waste pullout is designed for 1-1/2 inch, 1-5/8 inch, and 1-3/4 inch face frame sizes.
This bottom mount trash pullout is designed to work with frameless construction when cabinet dimensions and mounting conditions are confirmed.
This garbage pullout includes two 50 quart plastic bins in a silver metallic finish.
This trash can pullout comes fully assembled, which can reduce setup time before installation.
This Rev-A-Shelf trash pull-out has door mount brackets built into the frame.
This waste basket pull-out is listed as 17-1/4 inches wide in the verified product data.
This garbage pull-out uses the Rev-A-Motion gas spring assisted soft open and soft close mechanism with 1 inch of overtravel.
This recycling pull-out requires confirmation of cabinet opening width, interior depth, face frame or frameless construction, and floor mounting condition. Follow manufacturer installation guidance and local building requirements where applicable.
This Rev-A-Shelf bottom mount trash pullout has a verified maximum weight capacity of 150 lb.
garbage pullout buyers should focus on cabinet fit, mounting style, and included bin layout before ordering. This Rev-A-Shelf unit includes a fully assembled maple frame, two 50 quart silver metallic bins, built-in door mount brackets, and soft open and soft close operation with 1 inch overtravel. Confirm your cabinet opening, face frame size or frameless construction, interior depth, and bottom mounting condition so the pull-out matches the job before purchase.
Sold In: 1 Each