Rev-A-Shelf 4WTCD Series 21"W Maple Cutlery Drawer Soft-close Full extension Slides, Door Mount - 4WTCD-24HSC-1

Choose a Rev-A-Shelf cutlery drawer

Rev-A-Shelf cutlery drawer adds organized utensil storage to a kitchen cabinet opening with a pre-assembled two-tier wood drawer system. This Rev-A-Shelf maple cutlery drawer is built for a 24 inch cabinet with a 21 inch opening and is designed for 1-1/2 inch face frame cabinet construction only. The unit includes 90 lb full extension slides with soft-close action and uses adjustable door mount brackets that are required for operation. The top tier slides back inside the cabinet on ball-bearing drawer slides, helping you use vertical space that a standard replacement drawer box often leaves unused. This kitchen cabinet organizer drawer arrives fully assembled and is made from maple wood with a clear coat finish.

See how this maple cutlery drawer helps

• Two-tiered drawer system - creates more usable storage for cutlery and small kitchen tools within one cabinet opening.
• Pre-assembled Rev-A-Shelf wood drawer system - reduces setup time because the drawer box is ready to install into an existing drawer opening.
• Maple wood construction with clear coat finish - provides a durable wood surface suited for daily kitchen use.
• 90 lb full-extension BLUMOTION slides with soft-close - gives smooth access to drawer contents and helps limit hard closing.
• Top-tier tray slides back inside the cabinet on ball-bearing slides - lets the user reach lower storage without removing the upper section.
• Designed for a 24 inch cabinet with a 21 inch opening - helps buyers match the drawer to the intended cabinet size before ordering.
• Built for 1-1/2 inch face frame cabinet construction only - clarifies a key fit requirement so installers can avoid a mismatch.
• Adjustable door mount brackets are included and required - supports attachment of the existing cabinet drawer front for proper operation.
• Drawer front is supplied by the buyer - allows the replacement drawer box to work with the cabinet's current front for a matched look.

Confirm fit for your wood drawer system

Key specs to confirm: This wood drawer system is designed for a 24 inch cabinet with a 21 inch opening. It is for 1-1/2 inch face frame cabinet construction only, so buyers should confirm cabinet type before ordering. The product uses 90 lb full-extension BLUMOTION slides with soft-close and a top tier that moves on ball-bearing slides. Because this is a door mount drawer that replaces an existing drawer, verify that your drawer front can be attached correctly and that the opening allows the two-tier assembly to operate. If you need exact interior depth, height, or additional dimensional clearances beyond the listed cabinet and opening sizes, confirm those details with manufacturer documentation before purchase. Any unlisted load, compliance, or technical requirements should also be confirmed with the manufacturer or technical documentation.

What's included: A fully assembled maple wood cutlery drawer box, 90 lb full-extension BLUMOTION soft-close slides, top-tier ball-bearing slides, and adjustable door mount brackets. The buyer supplies and attaches the existing cabinet drawer front.

What to verify before ordering: Confirm a 24 inch cabinet, a 21 inch opening, 1-1/2 inch face frame construction, door-mount compatibility, and enough internal cabinet space for the tiered drawer to slide and retract as intended.

Use a two-tiered cutlery drawer well

Use this door mount drawer daily

A two-tiered cutlery drawer is useful when a standard single drawer does not provide enough organized space for flatware, serving pieces, and small prep tools. In many kitchens, the top area of a drawer opening is underused. This Rev-A-Shelf cutlery drawer addresses that issue by adding a top tier that slides back inside the cabinet on ball-bearing slides, allowing access to the lower storage area without removing parts. For a busy kitchen, that means cutlery can stay separated while the lower level handles larger utensils or mixed items.

This maple cutlery drawer also fits buyers replacing an existing drawer box rather than building a new drawer from scratch. The pre-assembled construction helps installers save time on assembly steps, and the included adjustable door mount brackets are required so the existing cabinet drawer front can be attached. That matters for remodel work where the finished cabinet face needs to stay consistent with the rest of the kitchen.

For a face frame cabinet drawer application, fit is the main issue to check first. The verified requirement is 1-1/2 inch face frame cabinet construction only. The product is also designed for a 24 inch cabinet with a 21 inch opening. If your cabinet opening or frame layout differs, confirm exact compatibility before ordering. Buyers should also review whether the cabinet interior gives enough room for the upper tray to move rearward and for the full extension slides to operate correctly.

Daily use is supported by the 90 lb full extension slides with soft-close action. Full extension slides help bring stored items forward so contents are easier to reach, while soft-close movement helps control closing action. For households or jobsite installs where quiet operation and access matter, those are practical advantages. Because this is a kitchen cabinet organizer drawer made from maple wood with a clear coat finish, it also suits projects where a wood interior is preferred over a metal insert. If exact compartment layout details are needed, buyers should confirm them in product documentation because only the tiered format and construction details are verified here.

Compare this replacement drawer box carefully

When comparing a replacement drawer box, buyers usually look at three things first: cabinet fit, slide type, and installation method. This Rev-A-Shelf wood drawer system gives clear verified information in all three areas. It is made for a 24 inch cabinet with a 21 inch opening, it uses 90 lb full-extension BLUMOTION soft-close slides, and it is intended to replace an existing drawer while using the buyer's own drawer front.

That makes it different from generic organizer inserts that simply drop into a drawer. A drop-in tray may not improve access or use vertical space effectively. This product is a built-in door mount drawer, so it functions as the drawer assembly itself. That is often a better fit for projects where the original drawer box is being removed and replaced.

It also differs from unfinished or knock-down wood drawer parts that require more shop work before install. The pre-assembled format helps keep the install process more direct for a professional installer or a serious DIY buyer. The included adjustable door mount brackets are another practical point because they are required for operation, not an optional add-on.

Material and finish also matter in comparison shopping. This unit is a maple cutlery drawer with a clear coat finish, which gives a finished wood appearance right out of the box. Buyers who need a matching cabinet front should note that the drawer front is not part of the included wood box and must be attached from the existing cabinet. As with any face frame cabinet drawer project, exact opening size, frame construction, and interior clearance should be confirmed before purchase so the product type and cabinet type are aligned.

Ask fit questions before drawer install

Order the right soft-close cutlery drawer

Soft-close cutlery drawer selection starts with fit. This Rev-A-Shelf unit is a fully assembled maple wood drawer system for a 24 inch cabinet with a 21 inch opening and 1-1/2 inch face frame construction only. It includes the soft-close and ball-bearing slide hardware described above, plus the adjustable door mount brackets required for operation. Before purchase, confirm cabinet opening size, frame type, interior clearance, and your ability to reuse the existing drawer front so the replacement drawer box installs and operates as intended.