Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Omega National CO2 Series Hickory tambour door kit provides a solid wood appliance garage door solution at 15 inches wide by 18 inches high, so you can finish a compact counter storage opening with a matched hickory front. The set uses a solid wood tambour door with a wood pull handle, giving you a continuous wood look that reads as a finished cabinet component on the job. The tambour is built from 3/16 inch thick and 3/4 inch wide slats with cloth backing, allowing the door to flex smoothly along the track while keeping the slats aligned over time. The spring tension tambour track system guides the door using internal spring force, which helps the door travel consistently in the guide path. Two PVC guide rails support the track system, providing a defined route for the door movement inside the cabinet. Wood dowels, a tension spring, and donut components form the working core of the track system so the door and guides operate together as a coordinated assembly.
This Omega National tambour door system is specified at 15 inches wide by 18 inches high, so layout work can be based on a known door envelope for the appliance garage opening. The tambour is constructed with 3/16 inch thick, 3/4 inch wide solid wood slats on cloth backing, which lets the panel roll along the track curve while staying flat in the vertical face position. The spring tension tambour track system relies on two PVC guide rails to define the path, so the door follows a controlled radius rather than dragging against the cabinet. Wood dowels, donut pieces, and a tension spring combine to keep the tambour under spring load, which helps the door move in a repeatable way when pulled by the wood handle. The ability to cut the kit down to narrower widths means the same 18 inch height and track concept can be used across several cabinet bay sizes in a project.
This Omega National hickory tambour door kit is part of the appliance garages and tambour doors product class, so it is intended to close off counter-depth storage areas in kitchen or bath cabinetry. The 15 inch width and 18 inch height suit a compact appliance garage bay, providing vertical coverage for common counter openings in a hickory cabinet run. Solid wood construction in hickory gives the exposed face a consistent species match when working with hickory fronts elsewhere in the installation. The door uses 3/4 inch wide slats, so the face presents as narrow, repeated strips rather than a flat panel, which visually aligns with traditional tambour styling in many cabinet programs. The wood pull handle attached to the door keeps the users contact point on a dedicated piece of wood, helping maintain the integrity of the slatted face over frequent cycles.
The tambour door and track system create a rolling door assembly, so the door travels along two PVC guide rails instead of swinging into the workspace. The cloth-backed slats bend along the guide path, allowing the 18 inch height to retract into the cabinet depth when the opening needs to stay clear for appliance access. Wood dowels and donut components engage with the tension spring, so the system maintains controlled movement as the door is raised or lowered by the pull handle. Because the kits can be cut down to narrower widths while remaining functional, a shop can start from the 15 inch model and trim to the cabinet opening, preserving the full 18 inch coverage while tailoring the side-to-side dimension.
The spring tension tambour track system anchors the movement of the hickory door, so installers are working with a defined mechanism rather than a loose sliding panel. Two PVC guide rails define the route, which keeps the solid wood slats traveling within a consistent channel and reduces side play inside the cabinet structure. The 3/16 inch thick solid wood slats offer a known thickness, so clearances at the face frame or cabinet sides can be planned around a stable panel build. Cloth backing ties the 3/4 inch wide slats together, so the tambour acts as a single flexible sheet when moving through the guide curve, which benefits long-term tracking. Wood dowels and donuts act as structural elements in the track system, so the connection between the rolling door and the spring remains organized around specific parts instead of relying solely on friction. The tension spring contributes constant pull within the mechanism, so the action remains repeatable every time the wood pull handle is operated during daily cabinet use.
The CO2-SHI-1 tambour door is specified at 15 inches wide by 18 inches high, so cabinet openings for an appliance garage can be planned around that door size.
The Omega National tambour is solid wood in hickory, so the visible face presents real hickory grain that can align with other hickory cabinet components.
The tambour door runs in a spring tension tambour track system with two PVC guide rails, so the door follows a controlled path inside the cabinet opening.
The CO2-SHI-1 kit can be cut down to narrower widths and still function properly, so the assembly can be sized to fit smaller openings.
The hickory tambour uses 3/16 inch thick, 3/4 inch wide solid wood slats with cloth backing, so the door can bend along the track while remaining unified.
The tambour door has a wood pull handle, so users get a dedicated gripping point for opening and closing without handling individual slats.
The Omega National CO2 Series Hickory tambour door kit in 15 inch by 18 inch sizing combines a solid wood hickory face with a spring tension tambour track system, giving you a defined mechanism and appearance for an appliance garage bay. The 3/16 inch thick, 3/4 inch wide cloth-backed slats and PVC guide rails work together to form a controlled rolling action that keeps the door moving in a set path. The ability to cut the kit down to narrower widths while maintaining proper function lets you adapt this CO2-SHI-1 assembly to the specific cabinet opening you are building, so the finished appliance garage can align with your planned layout.