Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bottom mount waste pullout gives a cabinet a dedicated place for trash while keeping the bin stored inside the opening. This Rev-A-Shelf waste pullout is a single bin waste container pullout built as a bottom-mount unit with standard full extension slides. The Rev-A-Shelf product includes one 30 quart white waste bin and is listed at 9-1/2 inches wide and 19-1/4 inches high in the web description. For buyers planning a kitchen cabinet trash pullout, that combination helps narrow fit and access expectations before installation. The white waste bin supports a clean, easy-to-identify interior setup, and the full extension slides are intended to bring the container forward for access. This bottom mount trash pullout is suited to projects where a single-bin layout is preferred over a wider multi-bin arrangement.
Key specs to confirm: This cabinet waste container is described as a Rev-A-Shelf RV Series bottom mount waste pullout with one 30 quart white bin, standard full extension slides, a listed width of 9-1/2 inches, and a listed height of 19-1/4 inches. Before purchase, confirm the cabinet opening width, interior height, and usable floor area for the bottom-mount hardware. Also confirm door clearance and whether your cabinet layout allows the pullout to travel fully. If load details, slide rating, compliance information, or any other technical limits are needed for your project, those must be confirmed with the manufacturer or technical documentation.
What's included: Verified included content is one 30 quart white bin. The product is described as a bottom mount waste container pullout with standard full extension slides. If you need a complete hardware list, confirm included components before ordering.
What to verify before ordering: Check cabinet opening size, inside cabinet height, bottom panel condition for mounting, door and hinge clearance, and whether a single-bin 30 quart layout matches the waste capacity you want.
A kitchen cabinet trash pullout is often chosen when the goal is to keep waste off the floor and inside the cabinet while still making the bin easy to reach. This Rev-A-Shelf waste pullout fits that common use case with a single 30 quart white bin in a bottom-mount format. For a homeowner updating one base cabinet near the sink or prep area, a single bin waste container pullout can create a dedicated trash location without moving to a wider multi-bin arrangement. For an installer, the listed 9-1/2 inch width and 19-1/4 inch height help start the fit check early, especially in projects where every inch inside the cabinet matters.
This product type can also make sense in utility areas, smaller kitchen layouts, or remodels where the cabinet already has a practical opening for a narrow bottom mount trash pullout. The standard full extension slides matter in daily use because they are intended to bring the white waste bin out toward the user instead of leaving it recessed deep in the cabinet. That can make bag removal, wiping the bin, and routine access more straightforward.
Buyers should still confirm the details that are not fully stated in the verified data. For example, confirm the required cabinet opening width beyond the listed product width, the mounting hardware included, and any door-mount or frame-clearance considerations if they apply to your cabinet style. If you are replacing an existing trash pull-out, compare the old unit's installed footprint and travel path to this bottom mount waste pullout before ordering. If you are specifying a new kitchen cabinet trash pullout for a build, confirm that the cabinet floor can accept the bottom-mount installation and that the opening allows the pullout to extend without interference.
When comparing a trash pull-out, the most useful details are often the ones tied directly to fit and daily use. This Rev-A-Shelf bottom mount waste pullout gives buyers a clearly defined format: one bin, 30 quart capacity, white container, bottom-mount installation, and standard full extension slides. That makes it easier to compare against other pullouts in a practical way. A buyer can ask whether a single-bin layout is enough, whether the listed width suits the cabinet, and whether the slide style matches the expected access.
Another point that matters is product clarity. The verified description identifies the product as a bottom mount waste container pullout in the Rev-A-Shelf RV Series, which helps when matching a project specification or reordering for another cabinet. A clearly identified product type also helps avoid confusion with top-mount, door-mount, or multi-bin systems that may install differently.
For reliability in planning, use the verified dimensions and included bin information first, then confirm anything not shown in the product data. That includes exact cabinet opening requirements, hardware pack contents, and any technical limits needed for commercial or demanding residential use. In many projects, the right waste pullout is not about extra options. It is about selecting a product with the right mount style, bin count, and cabinet fit so installation can proceed with fewer surprises.
This trash pull-out has a listed width of 9-1/2 inches and a listed height of 19-1/4 inches, but cabinet opening width, interior depth, and door clearance must be confirmed before ordering.
This Rev-A-Shelf waste pullout is a single bin waste container pullout with one 30 quart white bin.
This cabinet waste container is described as a bottom mount waste pullout, so buyers should confirm the cabinet floor area and mounting surface before installation.
This Rev-A-Shelf waste pullout is described with standard full extension slides, which are intended to bring the bin outward for access.
This bottom mount trash pullout includes one 30 quart white bin.
This product has a listed height of 19-1/4 inches, so cabinet interior height should be checked along with any clearance needed for installation and use.
This product is categorized under trash pull-outs for kitchen and bath cabinet accessories, and many buyers use this product type as a kitchen cabinet trash pullout.
This replacement check should include cabinet opening size, mount style, slide travel, bin capacity, and whether the old unit used a similar bottom-mount layout.
Load ratings and compliance details are not provided in the verified data, so those should be confirmed with the manufacturer or technical documentation. Follow manufacturer installation guidance and local building requirements where applicable.
bottom mount trash pullout selection is easier when you start with the verified basics: this Rev-A-Shelf unit is a bottom-mount pullout with one 30 quart white bin, standard full extension slides, and listed dimensions of 9-1/2 inches wide by 19-1/4 inches high. Confirm that your cabinet can accept the mount style, width, height, and pullout travel before purchase. Also verify the included hardware details if your project requires a complete component list. A careful fit check helps ensure this single-bin waste container pullout matches the cabinet and the way the space will be used.
Sold In: 1 Each