
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
DH Casters rigid caster uses a 2 inch polyolefin wheel to carry up to 300 lb, so it moves heavy fixtures on a compact footprint while staying within its rated capacity. The rigid design tracks straight, which keeps fixtures stable when you push or pull them into position. A zinc plated finish covers the metal components, so the caster resists surface wear in typical store and equipment environments. The wheel is non-marking, so it rolls across finished floors without leaving black streaks. This caster uses a threaded stem mount instead of a top plate, which lets you fasten it into a compatible threaded socket on the fixture. The stem mount keeps the footprint small around the wheel area, which helps when space around legs or frames is limited.
This threaded stem mount caster uses a 1/2 inch - 13 stem that is 1-1/2 inches long, so it is designed to thread into a matching tapped hole or insert on the fixture. The stem-mounted design concentrates attachment at a single point, which suits legs, frames, and bases that already provide a threaded receiver. With a 2 inch diameter wheel and 1-11/16 inch tread width, the caster creates a relatively low overall height, which matters when equipment or fixtures must stay near a set working level. The non-marking polyolefin wheel construction supports rolling over typical hard commercial floors while helping maintain a clean floor surface under repeated moves.
This display fixture caster is specified for applications such as store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos, so it is built for moving substantial loads in commercial and equipment settings. The 300 lb load capacity lets each caster share significant weight, which is important when supporting dense equipment or heavy merchandising racks. A 2 inch wheel diameter keeps the center of gravity low on items like coolers and pianos, which supports stability when they are rolled. The non-marking polyolefin wheel type helps protect hard-surface floors found in grocery, retail, and equipment rooms.
The threaded stem mount caster uses a 1/2 inch - 13 x 1-1/2 inch stem, which gives installers a consistent thread size and length for repeatable mounting across multiple legs or corners. The rigid type construction holds the wheel in a fixed direction, which lets rows of casters work together to move fixtures in straight lines down aisles or alongside walls. The 1-11/16 inch tread width combines with the polyolefin material to carry the 300 lb capacity, which supports predictable performance when casters are used in sets under larger fixtures. Zinc plated finish on the caster structure provides a protective metal surface, which supports long-term appearance in visible retail and equipment areas. The defined wheel diameter, tread width, stem size, and rated load are all specified, which helps planners standardize on this DH Casters rigid caster across multiple fixture designs.
This DH Casters rigid caster has a 300 lb load capacity, so it is suited to support heavy fixtures or equipment when used within that rating.
The caster uses a 2 inch diameter wheel with a 1-11/16 inch tread width, which keeps overall height low while still providing a stable rolling surface.
The caster uses a threaded stem mount sized 1/2 inch - 13 x 1-1/2 inch, so it screws into a matching threaded hole or insert on the fixture.
The wheel is polyolefin, providing a hard, non-marking rolling surface that supports floors in commercial and equipment environments.
This caster is rigid, so the wheel stays fixed in one direction, which helps fixtures roll in straight lines during movement.
The caster is listed for store display fixtures, computer mainframes, grocery coolers and freezers, vending machines, and pianos in commercial settings.
This 300 lb threaded stem caster from DH Casters combines a 2 inch non-marking polyolefin wheel, rigid construction, and zinc plated finish to support demanding store and equipment moves. Matching its 1/2 inch - 13 x 1-1/2 inch stem to your threaded receivers lets you standardize mobility on display fixtures, coolers, mainframes, vending machines, or pianos that fall within its rated capacity.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | CCB20034P1PS Mfr# C-B20034P1PS | DH Casters Rigid Caster With 2" Polyolefin Wheel No Brake, Plate Mount 300lb Capacity - C-B20034P1PS |