Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
DH Casters wheel 16 inch is a rubber wheel with a metal hub rated for 325lb capacity, so it supports medium-duty loads while keeping rolling effort manageable on typical jobsite and facility surfaces. The 16 inch diameter helps the wheel roll over transitions and uneven spots, keeping carts and equipment moving without frequent hang-ups. The rubber construction absorbs shock and vibrations during movement, which protects both the load and the supporting structure from harsh jolts as the wheel crosses rough areas. This same rubber tread also offers quiet rolling, which is important in noise sensitive environments where constant clatter is a problem. The wheel is classified under caster accessories, so it is designed to work as the rolling element in caster-based assemblies for trucks, carts, and similar mobile equipment.
This DH Casters wheel uses a rubber tread over a metal hub, so it balances load support with a degree of compliance on typical building and site floors. The wheel is listed for use on asphalt, brick, cobblestone, concrete, dirt, grass, and gravel, so it supports movement over mixed outdoor surfaces often found between buildings and loading points. It is also listed for carpet, linoleum/vinyl/PVC, terrazzo, tile, wood, bar grating, ribbed steel, and smooth steel, which means the tread is intended to interact with both hard and soft interior surfaces. Across these surfaces, the wheel is described as ensuring smooth mobility and gently transporting loads, which helps keep handling predictable as equipment moves from one floor type to another within the same route.
The DH Casters wheel 16 inch is suited to builders hardware and caster accessory applications where carts or equipment must travel over varied flooring. Its rubber tread is specified for asphalt, concrete, cobblestone, dirt, grass, and gravel, so it supports movement across exterior approaches, yards, and transitional outdoor paths. The same wheel is specified for carpet, linoleum/vinyl/PVC, terrazzo, tile, wood, bar grating, ribbed steel, and smooth steel, which covers many interior shop, warehouse, and commercial surfaces. Because the wheel gently transports loads while absorbing shock and vibrations, it is appropriate for applications where jarring movement could affect contents or mounted components. The quiet rolling characteristic aligns with noise sensitive environments, such as finished commercial interiors, institutional spaces, or areas adjacent to occupied offices.
The 325lb capacity gives a concrete load reference for each DH Casters wheel, so projects can be planned by multiplying wheel count to suit the intended total load on a cart or fixture. The metal hub forms a rigid center that carries this load through the caster, which supports consistent rolling behavior and helps maintain alignment under weight. The rubber tread layer absorbs shock and vibrations, which smooths out movement as the wheel passes over joints, small obstacles, and surface changes. That shock absorption also supports the stated smooth mobility and gentle transport, reducing the transmission of impact into frames, welds, and cargo. Quiet rolling is a direct result of the rubber interacting with listed floor types, which helps keep operational noise down along mixed routes that pass through noise sensitive areas.
The DH Casters wheel 16 inch is rated for 325lb capacity, allowing it to handle medium-duty loads when used as part of a caster assembly on carts or equipment.
The rubber tread absorbs shock and vibrations while rolling, which supports smooth mobility, gentler load transport, and quieter operation on the listed floor surfaces.
The wheel is specified for asphalt, bar grating, brick, carpet, cobblestone, concrete, dirt, grass, gravel, linoleum/vinyl/PVC, ribbed steel, smooth steel, terrazzo, tile, and wood.
The metal hub provides a rigid core that supports the 325lb capacity, helping the wheel carry load through the caster assembly without the center deforming under weight.
The wheel offers quiet rolling, so it supports use in noise sensitive environments where reduced rolling noise is beneficial during frequent equipment movement.
The product is classified as a caster accessories wheel, so it functions as the rolling element within builders hardware caster assemblies for mobile equipment.
The DH Casters wheel 16 inch, with its 325lb capacity, rubber tread, and metal hub, provides a defined combination of load rating and rolling behavior for caster assemblies. Its suitability across asphalt, concrete, carpet, steel, and other listed surfaces helps one wheel type serve multiple routes inside and outside a facility. The shock absorbing, quiet rolling characteristics support gentle, low-noise transport where both contents and surroundings matter. For caster-based carts, fixtures, or equipment that regularly cross mixed flooring, this wheel offers a clearly specified option that aligns with builders hardware and caster accessory requirements.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  CCWPN16480K4C Mfr# W-PN16480K4C | DH Caster 16" Wheel, 325 lb, W-PN16480K4C |