
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt BSC bottom mount waste pullout is a cabinet-mounted trash solution that uses a bottom mount design to place the unit on the cabinet floor, which keeps the load supported by the cabinet base for predictable slides and alignment. The pullout uses dual baskets so trash and recycling, or two waste streams, can be separated at the same reach point inside the cabinet. It uses two 35 quart platinum bins, giving a consistent bin size for planning opening heights and service intervals in a kitchen. A soft-close action controls the closing stroke, so the pullout returns smoothly into the cabinet, which helps keep the cabinet face and internal hardware from slamming impacts. The finish is frosted nickel, so the visible metal components present a neutral metallic tone that coordinates with many contemporary and traditional kitchen hardware finishes.
This bottom mount trash pullout is specified for a 15 inch minimum cabinet opening, so it is intended for cabinets that provide at least that clear opening width at the face frame or box. The bottom mount configuration anchors the pullout on the cabinet floor, which lets the slides and frame reference the base instead of the cabinet sides during layout. The unit is designed for a door mount kit identified as FYSP-DOORKIT-ANO, sold separately, so the pullout is prepared to connect to a cabinet door using that specific kit when door mounting is desired. With 14-5/16 inch referencing in the product name, the installer can relate that dimension to depth or slide length noted by Knape and Vogt when laying out positions inside the cabinet.
This bottom mount trash pullout is specified in the Kitchen & Bath Cabinet Accessories category under trash pull-outs, so it is intended for use inside cabinet bases in kitchen or bath layouts that need hidden waste storage. It belongs to the product class Bottom Mount Trash Pullouts, which identifies it as a unit designed to sit on and reference the cabinet bottom instead of hanging from side walls or a face frame. The 15 inch minimum cabinet opening requirement aligns it with cabinet runs that dedicate at least that much front opening to a waste pullout, which guides cabinet selection on new installs. Dual baskets using two 35 quart platinum bins provide consistent capacity on each side, which helps in kitchens that standardize bag sizes and want symmetric trash and recycling. The frosted nickel finish works with visible metal frame or slide elements, so exposed hardware in open cabinets or partial-overlay layouts presents a coordinated look with other frosted nickel components.
The dual baskets open smoothly and close softly, so every pull and push of the waste unit is managed by the soft-close slide action, which supports a quieter work area when cabinets are used repeatedly through the day. The top basket adjusts up or down, giving flexibility to position the upper bin for clearance above the lower bin, which simplifies liner changes and allows the installer to set a vertical gap that matches typical trash volumes. Both baskets slide separately, so each bin can move on its own, which is useful when only one waste stream needs to be accessed, swapped, or cleaned without disturbing the second bin. The door mount kit sold separately as item FYSP-DOORKIT-ANO is specified for this pullout, so the system is configured for direct door connection using that part when a one-motion door-and-pullout movement is desired. The soft-close bottom mount configuration combines guided motion with cabinet-floor support, which helps maintain alignment of the bins with the cabinet face over repeated cycles.
The Knape and Vogt BSC bottom mount waste pullout uses a bottom mount design, so it fastens to the cabinet floor and references the base during layout and installation.
The waste pullout is specified for a 15 inch minimum cabinet opening, so it is intended for cabinets providing at least that clear opening width at the front.
The unit uses two 35 quart platinum bins, so it offers dual equal-capacity containers suitable for separating trash and recycling or other waste streams.
The waste pullout uses a soft-close action, so the dual baskets close softly and return smoothly into the cabinet, reducing noise and impact on cabinet parts.
The top basket adjusts up or down, so its height can be set relative to the lower basket to create clearance for bag changes or specific waste types.
The pullout is designed to work with a door mount kit sold separately as item FYSP-DOORKIT-ANO, so that kit links the cabinet door directly to the waste pullout frame.
This Knape and Vogt SP-BSC15-2-35-P bottom mount waste pullout combines dual 35 quart platinum bins, soft-close motion, and a frosted nickel finish for cabinet bases with a 15 inch minimum opening. For projects needing organized waste separation inside kitchen or bath cabinets, its bottom mount design and door-mount-ready frame align with typical base cabinet construction and support repeatable installations.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | FYSP-BSC10-1-35-P Mfr# SP-BSC10-1-35-P | Knape and Vogt BSC 9-11/16" Frosted Nickel Bottom Mount Waste Pullout with 2-35 Quart Platinum Bins Soft-Close, SP-BSC10-1-35-P | ||||
Sold in: 1 Kit | FYSP-BSC12-2-27-P Mfr# SP-BSC12-2-27-P | Knape and Vogt BSC 11" Frosted Nickel Bottom Mount Waste Pullout with 2-27 Quart Platinum Bins Soft-Close, SP-BSC12-2-27-P | ||||
Sold in: 1 Kit | FYSP-DOORKIT-ANO Mfr# SP-DOORKIT-ANO | Knape and Vogt Simply Put Series W Pullout Shelf with, - SP-DOORKIT-ANO |