Kreg Pocket-Hole Jig K4 is a Kreg Tool jig designed for pocket-hole drilling in woodworking projects where repeatable joints save time. The jig uses an adjustable, removable drill guide so one setup can serve multiple applications in the shop or on site. The drill guide adjusts for material thickness from 1/2 inch to 1-1/2 inch, which lets you switch between common cabinet parts, face frames, and other stock sizes without changing tools. Hardened-steel drill guides control the bit path, helping the bit track accurately through the workpiece for consistent pocket-hole alignment. An adjustable drill-bit stop collar works with the guide to set hole depth, which supports consistent screw engagement across parts of the same thickness. The jig body uses impact-resistant polymer construction, which helps the tool handle typical workshop handling and transport between jobs.
The Kreg Tool K4 jig uses an adjustable, removable drill guide to match material thickness from 1/2 inch to 1-1/2 inch, so the drilling position can be tuned to the stock in front of you. Once the drill guide height is set, the adjustable drill-bit stop collar is positioned to control depth, tying the bit travel directly to the guide setting for that thickness. A fast-action toggle clamp with adjustable clamp pad then secures the workpiece against the jig body, so the material stays seated while holes are drilled. Impact-resistant polymer construction supports this clamping action, providing a stable base as the clamp cycles through multiple parts during a run.
The Kreg Pocket-Hole Jig K4 is a woodworking jig in the Kreg Tools product class, suited to jobs where pocket-hole joinery speeds assembly. Its adjustable, removable drill guide for material thickness from 1/2 inch to 1-1/2 inch lets a single setup handle a range of panel and frame components in cabinetry or general woodworking. Hardened-steel drill guides direct the stepped drill bit, which supports drilling through softer and harder stock while holding alignment. The fast-action toggle clamp with adjustable clamp pad holds the workpiece against the jig while holes are drilled, turning the jig into a small workstation that supports both shop benches and on-site setups.
The adjustable, removable drill guide on the Kreg K4 pocket-hole jig sets the hole position relative to the material edge, which matters when repeating the same joint across multiple parts because it keeps screw locations consistent. The adjustable drill-bit stop collar pairs with this guide to fix drilling depth, helping each pocket-hole reach the same depth so screws engage predictably in the mating piece. Hardened-steel drill guides resist wear as the stepped drill bit passes through, which maintains guiding accuracy over repeated cycles and supports long-term consistency in pocket-hole angle and spacing. The fast-action toggle clamp with adjustable clamp pad allows quick clamping and release, helping move through batches of parts while still holding each piece firmly during drilling. Impact-resistant polymer construction around these components provides a solid base and absorbs routine shop handling so the jig remains ready for the next setup.
The Kreg Pocket-Hole Jig K4 uses an adjustable drill guide for material thickness from 1/2 inch to 1-1/2 inch, so it covers many common cabinet and woodworking stock sizes with a single jig.
The adjustable removable drill guide on the Kreg K4 pocket-hole jig sets hole position for a given thickness, so repeating that setup keeps pocket-holes consistent across multiple parts in a run.
The Kreg Tool K4 drill-bit stop collar sets hole depth relative to the guide setting, which keeps pocket-holes uniform so screws seat similarly in each joint.
The hardened-steel drill guides on the Kreg K4 pocket-hole jig guide the bit accurately and resist wear, supporting long-term consistency in pocket-hole angle and placement.
The fast-action toggle clamp with adjustable clamp pad on the Kreg Tool K4 holds the workpiece firmly against the jig, which helps prevent shifting while drilling pocket-holes.
Impact-resistant polymer construction on the Kreg K4 pocket-hole jig provides a durable body that handles typical workshop handling while supporting the clamp and drill guide system.
The Kreg Pocket-Hole Jig K4 from Kreg Tool brings an adjustable, removable drill guide, hardened-steel drill guides, and an adjustable drill-bit stop collar together in one jig, so pocket-hole position and depth work as a matched system. The fast-action toggle clamp with adjustable clamp pad then locks material to that setup, helping you move through drilling while holding alignment. Impact-resistant polymer construction supports these components, providing a durable base for repeated cycles in woodworking environments. For buyers needing a pocket-hole jig that handles material thickness from 1/2 inch to 1-1/2 inch, the K4 layout offers a straightforward way to support that range using one tool.
Sold In: 1 Each