Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Formica IdealEdge Belmonte Granite ogee edge molding is a laminate edge molding that finishes exposed laminate edges, so countertops, islands, desks, and work stations gain a continuous decorative profile instead of a raw edge. The etchings finish and Belmonte Granite design match Formica laminate, so the edge visually ties into the surface for a unified look. The ogee shape provides a sculpted profile, which changes a square edge into a more detailed edge treatment on straight and angled runs. A 1-1/2 inch height works with common laminate build-ups, so the molding covers the edge band while aligning with the laminate face. The 144 inch length spans long runs, so many installations can be handled with a single continuous piece instead of multiple short joints.
This laminate edge molding is designed for glue-on installation, and the recommended glue is the AFF522 series, so bonding is matched to the Formica IdealEdge construction for dependable adhesion. Use on countertops, islands, desks, and work stations means it is suited to flat work surface applications where a laminate edge needs to be applied to the substrate edge. The ability to work on straight, curved, clipped, and 90 degree edges allows the installer to follow the substrate line, so the same edge profile wraps around corners and gentle curves. The 1-1/2 inch height provides coverage for typical build-ups, so the molding can be aligned from top laminate face down toward the underside for a consistent reveal.
This Formica Corporation laminate edge molding belongs to the Laminate Edge Moldings class, so it is intended as the finishing edge on laminate-clad projects. Its use on countertops, islands, desks, and work stations means it fits residential and commercial work surfaces where a decorative front edge is required. The Belmonte Granite etchings finish coordinates with matching Formica laminate, so the edge detail keeps the same visual story from deck to edge in Belmonte Granite designs. Suitability for straight, curved, clipped, and 90 degree edges allows the ogee profile to run around outside corners, soft radius ends, and angle cuts, so a single part number can handle many cabinet and top layouts. The 12 foot length supports long islands or continuous counters, so the molding can be cut to size for each edge instead of piecing together short sections along the run.
The 1-1/2 inch height gives predictable coverage from the top laminate down the edge, so installers can set a consistent reveal and repeat it across several sections of countertop. The moisture barrier MDF core supports performance in normal wet-use areas around sinks and prep zones, so exposed edges are protected by a core intended to handle typical moisture contact along the edge profile. A 10 year limited warranty that covers delamination of the edge indicates the product is built for long-term service, so fabricators can plan projects around a defined performance window. Recommended AFF522 series glue, sold separately, is matched to this edge molding, so the adhesive selection supports a bond system intended for this laminate construction. The laminate edge molding design finishes all visible sides, so both primary and secondary edges on islands and work stations match the main front edge design.
This product is a Formica Corporation laminate edge molding from the IdealEdge line, so it is used to create a finished decorative edge on laminate countertops and similar work surfaces.
The Belmonte Granite ogee edge molding is for countertops, islands, desks, and work stations, so it suits laminate work surfaces in both kitchen-style and office-style layouts.
The IdealEdge laminate molding is suitable for straight, curved, clipped, and 90 degree edges, so it can follow most common countertop and work surface layouts and transitions.
Each Formica IdealEdge Belmonte Granite ogee molding is 144 inches long, so longer counter and island edges can often be handled with a single continuous piece.
This IdealEdge profile is 1-1/2 inches high, and it is also available in a 1-1/4 inch profile, so it can match common laminate build-up thicknesses on different projects.
The molding uses a moisture barrier MDF core and carries a 10 year limited warranty covering delamination, so it is built for long-term edge performance in normal laminate environments.
The Formica IdealEdge Belmonte Granite ogee edge molding combines a laminate edge molding design, Belmonte Granite etchings finish, and 1-1/2 inch height, so it aligns with Formica laminate tops needing a coordinated ogee edge. Suitability for straight, curved, clipped, and 90 degree edges lets one profile run continuously around common countertop, island, desk, and work station layouts. The moisture barrier MDF core, 12 foot length, and 10 year limited warranty covering delamination give project planners defined performance characteristics. Choose this molding when a Formica IdealEdge Belmonte Granite laminate countertop or work surface requires a matching ogee edge detail.
Sold In: 1 Each